Use list tables to map up the UART Boot responsibility table. Signed-off-by: Nishanth Menon <n...@ti.com> --- Changes since V1 * No Change
V1: https://lore.kernel.org/all/20230727080027.2817701-13...@ti.com/ doc/board/ti/am65x_evm.rst | 38 ++++++++++++++++++++++++++++---------- 1 file changed, 28 insertions(+), 10 deletions(-) diff --git a/doc/board/ti/am65x_evm.rst b/doc/board/ti/am65x_evm.rst index 4132dd98e1ad..5a72814035ae 100644 --- a/doc/board/ti/am65x_evm.rst +++ b/doc/board/ti/am65x_evm.rst @@ -273,16 +273,34 @@ ROM supports booting from MCU_UART0 via X-Modem protocol. The entire UART-based boot process up to U-Boot (proper) prompt goes through different stages and uses different UART peripherals as follows: -.. code-block:: text - - +---------+---------------+-------------+------------+ - | WHO | Loading WHAT | HW Module | Protocol | - +---------+---------------+-------------+------------+ - |Boot ROM | tiboot3.bin | MCU_UART0 | X-Modem(*)| - |R5 SPL | sysfw.itb | MCU_UART0 | Y-Modem(*)| - |R5 SPL | tispl.bin | MAIN_UART0 | Y-Modem | - |A53 SPL | u-boot.img | MAIN_UART0 | Y-Modem | - +---------+---------------+-------------+------------+ +.. list-table:: ROM UART Boot Responsibilities + :widths: 16 16 16 16 + :header-rows: 1 + + * - Who + - Loading What + - Hardware Module + - Protocol + + * - Boot ROM + - tiboot3.bin + - MCU_UART0 + - X-Modem(*) + + * - R5 SPL + - sysfw.itb + - MCU_UART0 + - Y-Modem(*) + + * - R5 SPL + - tispl.bin + - MAIN_UART0 + - Y-Modem + + * - A53 SPL + - u-boot.img + - MAIN_UART0 + - Y-Modem Note that in addition to X/Y-Modem related protocol timeouts the DMSC watchdog timeout of 3min (typ.) needs to be observed until System Firmware -- 2.40.0
