> -----Original Message-----
> From: Sébastien Szymanski <sebastien.szyman...@armadeus.com>
> Sent: 2023年7月24日 23:18
> To: u-boot@lists.denx.de
> Cc: Bough Chen <haibo.c...@nxp.com>; Luca Ellero <l.ell...@asem.it>;
> Sébastien Szymanski <sebastien.szyman...@armadeus.com>
> Subject: [PATCH 1/1] dm: adc: imx93-adc depends on ADC (fix boot)
>
> The i.MX93 11x11 EVK fails to boot with following error:
>
> Model: NXP i.MX93 11X11 EVK board
> DRAM: 2 GiB
> Error binding driver 'imx93-adc': -96
> Some drivers failed to bind
> Error binding driver 'simple_bus': -96
> Some drivers failed to bind
> Error binding driver 'simple_bus': -96
> Some drivers failed to bind
> initcall sequence 00000000fffb8f28 failed at call 000000008021e0d4 (err=-96)
> ### ERROR ### Please RESET the board ###
>
> That's because since commit e7ff54d96303 ("imx93_evk: defconfig: add adc
> support") CONFIG_ADC_IMX93 is enabled but CONFIG_ADC is not.
> Fix this by making CONFIG_ADC_IMX93 depend on CONFIG_ADC.
>
> Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com>
Reviewed-by: Haibo Chen <haibo.c...@nxp.com>
> ---
> drivers/adc/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/adc/Kconfig b/drivers/adc/Kconfig index
> 4336732dee56..a01d73846b74 100644
> --- a/drivers/adc/Kconfig
> +++ b/drivers/adc/Kconfig
> @@ -66,6 +66,7 @@ config STM32_ADC
>
> config ADC_IMX93
> bool "Enable NXP IMX93 ADC driver"
> + depends on ADC
> help
> This enables basic driver for NXP IMX93 ADC.
> It provides:
> --
> 2.41.0
