Add support for the RK3399T-based Radxa ROCK 4SE board. This board offers similar peripherals and form-factor to the ROCK Pi 4B but uses the cost-optimised RK3399T processor (which has different a OPP table but otherwise minimal changes) and some other minor hardware changes between the Rock Pi 4B (described in the devicetree).
The first patch syncs the RK3399-based ROCK Pi 4 boards from Linux, moving the RK3399 OPP table from the generic Radxa ROCK Pi 4 dtsi into board-specific devicetree files, in preparation for the ROCK 4SE devicetree file. The second patch adds support for the Radxa ROCK 4SE. Christopher Obbard (2): arm: rockchip: sync ROCK Pi 4 SoCs from Linux arm: rockchip: Add Radxa ROCK 4SE arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3399-rock-4c-plus.dts | 3 +- arch/arm/dts/rk3399-rock-4se-u-boot.dtsi | 6 ++ arch/arm/dts/rk3399-rock-4se.dts | 65 +++++++++++++++ arch/arm/dts/rk3399-rock-pi-4.dtsi | 5 +- arch/arm/dts/rk3399-rock-pi-4a.dts | 1 + arch/arm/dts/rk3399-rock-pi-4c.dts | 1 + board/rockchip/evb_rk3399/MAINTAINERS | 6 ++ configs/rock-4se-rk3399_defconfig | 100 +++++++++++++++++++++++ doc/board/rockchip/rockchip.rst | 2 +- 10 files changed, 184 insertions(+), 6 deletions(-) create mode 100644 arch/arm/dts/rk3399-rock-4se-u-boot.dtsi create mode 100644 arch/arm/dts/rk3399-rock-4se.dts create mode 100644 configs/rock-4se-rk3399_defconfig -- 2.40.1
