From: Fabio Estevam <feste...@denx.de>
For changing the USB OTG node status from "okay" to "disabled" more
space is needed, so call fdt_increase_size() to avoid the following
error:
```
U-Boot 2023.07-rc5-0.0.0-devel+git.580eb31199be (Jun 27 2023 - 13:39:58 +0000)
CPU: Freescale i.MX7S rev1.2 800 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 30C
Reset cause: POR
DRAM: initcall sequence 8786eafc failed at call 8781b351 (err=-3)
### ERROR ### Please RESET the board ###
```
Ideally, fdt_status_disabled() should call fdt_increase_size() internally,
so that there would be no need for manually calling it in board code.
Do it manually for now to fix the regression.
Based on the code from board/CZ.NIC/turris_omnia/turris_omnia.c.
Reported-by: Francesco Dolcini <francesco.dolc...@toradex.com>
Signed-off-by: Fabio Estevam <feste...@denx.de>
Reviewed-by: Francesco Dolcini <francesco.dolc...@toradex.com>
Tested-by: Francesco Dolcini <francesco.dolc...@toradex.com> # Toradex Colibri
iMX7S
---
Changes since v1:
- Fix indentation. (Francesco)
board/toradex/colibri_imx7/colibri_imx7.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c
b/board/toradex/colibri_imx7/colibri_imx7.c
index 3e79ab93a982..119e67b47f79 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -311,10 +311,23 @@ int ft_board_setup(void *blob, struct bd_info *bd)
#ifdef CONFIG_USB_EHCI_MX7
int board_fix_fdt(void *rw_fdt_blob)
{
+ int ret;
+
/* i.MX 7Solo has only one single USB OTG1 but no USB host port */
if (is_cpu_type(MXC_CPU_MX7S)) {
int offset = fdt_path_offset(rw_fdt_blob,
"/soc/bus@30800000/usb@30b20000");
+ /*
+ * We're changing from status = "okay" to status = "disabled".
+ * In this case we'll need more space, so increase the size
+ * a little bit.
+ */
+ ret = fdt_increase_size(rw_fdt_blob, 32);
+ if (ret < 0) {
+ printf("Cannot increase FDT size: %d\n", ret);
+ return ret;
+ }
+
return fdt_status_disabled(rw_fdt_blob, offset);
}
--
2.34.1
