add following XTX part numbers to the list:
xt25f08: 3V QSPI, 8Mbit
xt25f16: 3V QSPI, 16Mbit
xt25f32: 3V QSPI, 32Mbit
xt25f64: 3V QSPI, 64Mbit
xt25f128: 3V QSPI, 128Mbit
xt25f256: 3V QSPI, 256Mbit
xt25q08: 1.8V QSPI, 8Mbit
xt25q16: 1.8V QSPI, 16Mbit
xt25q32: 1.8V QSPI, 32Mbit
xt25q64: 1.8V QSPI, 64Mbit
xt25q128: 1.8V QSPI, 128Mbit
xt25q256: 1.8V QSPI, 256Mbit
xt25q512: 1.8V QSPI, 512Mbit
xt25q01g: 1.8V QSPI, 1Gbit
xt25w512: wide voltage, QSPI, 512Mbit
xt25w01g: wide voltage, QSPI, 1Gbit
remove xt25f128b and add xt25f128,because xt25f128b andxt25f128f
share same jdec id,we use xt25f128 instead.
Signed-off-by: Bruce Suen <bruce_s...@163.com>
---
V2:
modify commit head,add detailed part numbers
---
drivers/mtd/spi/spi-nor-ids.c | 38 +++++++++++++++++++++++++++++++++--
1 file changed, 36 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 3f8b796789..9a079c851d 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -528,8 +528,42 @@ const struct flash_info spi_nor_ids[] = {
{ INFO("XM25QH128A", 0x207018, 0, 64 * 1024, 256, SECT_4K |
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
#endif
#ifdef CONFIG_SPI_FLASH_XTX
- /* XTX Technology (Shenzhen) Limited */
- { INFO("xt25f128b", 0x0b4018, 0, 64 * 1024, 256, SECT_4K |
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ /* XTX Technology Limited */
