Dear Reinhard, Point 1: taken and, as you can see, already improved upon Point 2: I did not know the new configuration procedure even though I had seen the boards.cfg file. The description in the README file is outdated. I tried to compile the at91sam9260ek_nandflash version with success but failed on the dataflash versions. Point 3: I have an old (1.3.4) working version for my "armuter-vmax" board, which is actually the at91sam9263ek_dataflash_c0 version in which only the main clock frequency has been patched. I therefore propose to give the at91sam9263ek_dataflash_c0 version a shot and see how far I will come. Hope this is ok. Cheers Uli
-----Original Message----- From: Reinhard Meyer [mailto:u-b...@emk-elektronik.de] Sent: Tuesday, February 08, 2011 5:43 PM To: Uli Raich; u-boot Subject: Re: [STATUS: AT91/AVR32] Dear Uli Raich, 1. please *always* reply to the list as well 2. Makefile is not relevant for new/fixed boards anymore. New/fixed boards are added to boards.cfg (and have to be removed from Makefile)! 3. *ONLY* at91sam9260/9xeek are known to work! at91sam9263ek definitely is not working yet, patches are in the pipeline. Best Regards, Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot