Hi, I'm using 2022.01 on rockpi-e and having an issue that some SDcards cannot seem to have issue with accessing partitions. I have the same image flashed on 2 SD cards. One boots fine and other one shows:
## Executing script at 00500000 Saving Environment to MMC... Writing to redundant MMC(1)... OK ** No partition table - mmc 1 ** whole log: U-Boot 2022.01 (Jan 10 2022 - 18:46:34 +0000) Model: Radxa ROCK Pi E DRAM: 510 MiB PMIC: RK8050 (on=0x40, off=0x00) MMC: mmc@ff500000: 1, mmc@ff520000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Radxa ROCK Pi E Net: Could not get PHY for ethernet@ff540000: addr -1 No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found U-Boot script /boot.scr 355 bytes read in 3 ms (115.2 KiB/s) ## Executing script at 00500000 Saving Environment to MMC... Writing to redundant MMC(1)... OK ** No partition table - mmc 1 ** Couldn't find partition mmc 1:2 Can't set block device Wrong Image Format for bootm command Is there maybe in newer u-boot some fix for this problem? Thanks and BR, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com
