HS400 speed mode is not supported for sdhci0 (eMMC) for J721E (errata of J721E: (i2024) 'MMCSD: Peripherals Do Not Support HS400'[1]). Thus, remove ti,strobe-sel property which is needed only for HS400 speed mode. This also helps sync kernel dts with u-boot dts.
[1] https://www.ti.com/lit/er/sprz455/sprz455.pdf Fixes: e64665fa727e ("arm: dts: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems") Signed-off-by: Bhavya Kapoor <b-kap...@ti.com> Signed-off-by: Neha Malcom Francis <n-fran...@ti.com> --- arch/arm/dts/k3-j721e-main.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/dts/k3-j721e-main.dtsi b/arch/arm/dts/k3-j721e-main.dtsi index cf3482376c..7dc6f923d1 100644 --- a/arch/arm/dts/k3-j721e-main.dtsi +++ b/arch/arm/dts/k3-j721e-main.dtsi @@ -1049,7 +1049,6 @@ ti,itap-del-sel-mmc-hs = <0xa>; ti,itap-del-sel-ddr52 = <0x3>; ti,trm-icp = <0x8>; - ti,strobe-sel = <0x77>; dma-coherent; }; -- 2.34.1
