The per-hart stack,malloc space and global variable 'gd' sits between
__bss_end and L2_LIM_MEM_END.Zeroing this region could overwrite the
hart's stack, and other harts' stacks.If it were to save and restore
`ra` register, then we would crash in function epilogue. Also, we are
having data-races here, because harts are writing over each other's
stack.

So we should split the zeroing of L2 LIM into different places just
before the region is to be used. For stacks,let each hart clearing its
own stack, and for the malloc space, we can do so during malloc
initialization. The global variable 'gd' is initialized in the
board_init_f_init_reserve function.

Signed-off-by: Yanhong Wang <yanhong.w...@starfivetech.com>
---
 arch/riscv/cpu/jh7110/spl.c |  6 +++---
 arch/riscv/cpu/start.S      | 14 ++++++++++++++
 common/init/board_init.c    |  1 +
 3 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/cpu/jh7110/spl.c b/arch/riscv/cpu/jh7110/spl.c
index 104f0fe949..6a48fba63d 100644
--- a/arch/riscv/cpu/jh7110/spl.c
+++ b/arch/riscv/cpu/jh7110/spl.c
@@ -10,7 +10,6 @@
 #include <log.h>
 
 #define CSR_U74_FEATURE_DISABLE        0x7c1
-#define L2_LIM_MEM_END 0x81FFFFFUL
 
 int spl_soc_init(void)
 {
@@ -42,13 +41,14 @@ void harts_early_init(void)
                csr_write(CSR_U74_FEATURE_DISABLE, 0);
 
        /* clear L2 LIM  memory
-        * set __bss_end to 0x81FFFFF region to zero
+        * set __bss_end to stack end region to zero
         * The L2 Cache Controller supports ECC. ECC is applied to SRAM.
         * If it is not cleared, the ECC part is invalid, and an ECC error
         * will be reported when reading data.
         */
        ptr = (ulong *)&__bss_end;
-       len = L2_LIM_MEM_END - (ulong)&__bss_end;
+       len = CONFIG_SPL_STACK - CONFIG_VAL(SYS_MALLOC_F_LEN) - sizeof(*gd) -
+                       CONFIG_NR_CPUS * BIT(CONFIG_STACK_SIZE_SHIFT) - 
(ulong)&__bss_end;
        remain = len % sizeof(ulong);
        len /= sizeof(ulong);
 
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index dad22bfea8..46da9ec503 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -118,6 +118,20 @@ call_board_init_f_0:
        mv      sp, a0
 #endif
 
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) && \
+               defined(CONFIG_STARFIVE_JH7110)
+
+       /* Set the stack region to zero */
+       li t0, 1
+       slli t1, t0, CONFIG_STACK_SIZE_SHIFT
+       mv t0, sp
+       sub t1, t0, t1
+clear_stack:
+       SREG    zero, 0(t1)
+       addi    t1, t1, REGBYTES
+       blt t1, t0, clear_stack
+#endif
+
        /* Configure proprietary settings and customized CSRs of harts */
 call_harts_early_init:
        jal     harts_early_init
diff --git a/common/init/board_init.c b/common/init/board_init.c
index 96ffb79a98..46e4e4abc7 100644
--- a/common/init/board_init.c
+++ b/common/init/board_init.c
@@ -162,6 +162,7 @@ void board_init_f_init_reserve(ulong base)
 #if CONFIG_VAL(SYS_MALLOC_F_LEN)
        /* go down one 'early malloc arena' */
        gd->malloc_base = base;
+       memset((void *)base, 0, CONFIG_VAL(SYS_MALLOC_F_LEN));
 #endif
 
        if (CONFIG_IS_ENABLED(SYS_REPORT_STACK_F_USAGE))
-- 
2.17.1

Reply via email to