On 2023/5/1 15:43, Wolfgang Zarre wrote:
If u-boot is installed on the internal emmc, then this will allow to boot without failure. Signed-off-by: Wolfgang Zarre <lxde...@zirdeon.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com> Thanks, - Kever
--- configs/pinebook-pro-rk3399_defconfig | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig index dff4695e37..58a8b91aa6 100644 --- a/configs/pinebook-pro-rk3399_defconfig +++ b/configs/pinebook-pro-rk3399_defconfig @@ -6,6 +6,7 @@ CONFIG_TEXT_BASE=0x00200000 CONFIG_NR_DRAM_BANKS=1 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 +CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro" @@ -18,6 +19,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 +CONFIG_PCI=y CONFIG_DEBUG_UART=y CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y @@ -57,17 +59,23 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_ROCKCHIP_EFUSE=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_SPL_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SF_DEFAULT_SPEED=20000000 CONFIG_SPI_FLASH_GIGADEVICE=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_NVME_PCI=y -CONFIG_PCI=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_TYPEC=y CONFIG_DM_PMIC_FAN53555=y
