Hi Jan
On 04/05/23 10:13, Neha Malcom Francis wrote:
Hi Jan,
On 03/05/23 22:04, Jan Kiszka wrote:
On 03.05.23 14:56, Neha Malcom Francis wrote:
Hi Jan,
On 03/05/23 12:57, Neha Malcom Francis wrote:
Hi Tom
On 27/04/23 04:07, Tom Rini wrote:
On Fri, Apr 21, 2023 at 06:01:44PM +0530, Neha Malcom Francis wrote:
This series aims to eliminate the use of additional custom
repositories
such as k3-image-gen (K3 Image Generation) repo and core-secdev-k3
(K3
Security Development Tools) that was plumbed into the U-Boot build
flow
to generate boot images for TI K3 platform devices. And instead, we
move
towards using binman that aligns better with the community standard
build
flow.
This series uses binman for all K3 platforms supported on U-Boot
currently;
both HS (High Security, both SE and FS) and GP (General Purpose)
devices.
Background on using k3-image-gen:
* TI K3 devices require a SYSFW (System Firmware) image
consisting
of a signed system firmware image and board configuration
binaries,
this is needed to bring up system firmware during U-Boot R5 SPL
startup.
* Board configuration data contain board-specific information
such as resource management, power management and security.
Background on using core-secdev-k3:
* Contains resources to sign x509 certificates for HS devices
Series intends to use binman to take over the packaging and
signing for
the R5 bootloader images tiboot3.bin (and sysfw.itb, for non-combined
boot flow) instead of k3-image-gen.
Series also packages the A72/A53 bootloader images (tispl.bin and
u-boot.img) using ATF, OPTEE and DM (Device Manager)
So, next up is fixing this in CI. After taking Andrew's patch to
fix the
typedef issue, and after my patches to ensure we can get
pyyaml/jsonschema for python, there's problems still:
Thanks for checking this! Couple things:
Over at https://source.denx.de/u-boot/u-boot/-/jobs/617966:
binman: Filename 'spl/dts/k3-am68-sk-base-board.dtb' not found in
input
path (.,/builds/u-boot/u-boot,board/ti/j721s2,arch/arm/dts)
(cwd='/tmp/.bm-work/j721s2_hs_evm_a72')
1. This is dependent on the patch merging J721S2 HS and GP configs
[1]. However it has been reverted on -next, seen in the same thread.
And then:
https://source.denx.de/u-boot/u-boot/-/jobs/617965#L1328
Error: arch/arm/dts/k3-am62a-sk-binman.dtsi:167.1-8 syntax error
I've fixed this, minor but serious change.
2. Regarding iot2050, build fails since it uses
arch/arm/mach-k3/config.mk which is now entirely binman based. Will
try moving iot2050 to binman as well.
I'll need some help with this, might need to know the bootloader flow to
make a clean migration.
Where do I have to look at? Is there a git repo with that experiment
somewhere?
Jan
There's no experiment yet, I will send one today; but I do not have
complete understanding of the booting; whether the tispl.bin (which I
assume is the only boot component that is affecting iot2050 boot since
k3_fit_atf.sh is no longer there) has any concept of signing? Is
core-secdev-k3 ever used?
I have a tree posted here [2] that builds flash.bin with no error for
me. Please confirm whether your build flow does the same and also let me
know if the binary actually boots.
[2]
https://github.com/nehamalcom/u-boot/tree/migration-to-binman-cicd-iot2050
--
Thanking You
Neha Malcom Francis
