Some VCT boards lacks the support of networking or USB. Additionally that support is disabled in small image configurations.
If CONFIG_CMD_NET should not used the CONFIG_CMD_NFS option have to be disabled too. Otherwise the linker fails with unresolved symbols. If CONFIG_VCT_SMALL_IMAGE is set than CONFIG_CMD_NET and CONFIG_CMD_USB are disabled at the end of vct.h. This is not adequate because CONFIG_CMD_USB enables additional options and the linker fails again with unresolved symbols. This patch adds an early check against CONFIG_VCT_SMALL_IMAGE so the additional options are only enabled if they are really needed. Signed-off-by: Daniel Schwierzeck <daniel.schwierz...@googlemail.com> Cc: Stefan Roese <s...@denx.de> --- include/configs/vct.h | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-) diff --git a/include/configs/vct.h b/include/configs/vct.h index 4894969..8162217 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -109,17 +109,20 @@ /* * Only Premium/Platinum have ethernet support right now */ -#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) +#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \ + !defined CONFIG_VCT_SMALL_IMAGE #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #else #undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS #endif /* * Only Premium/Platinum have USB-EHCI support right now */ -#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) +#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \ + !defined CONFIG_VCT_SMALL_IMAGE #define CONFIG_CMD_USB #define CONFIG_CMD_FAT #endif -- 1.7.3.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
