flash_get_size() will get the flash size from the device itself and go through all erase regions to read protection status. However, the device mappable region (eg: devicetree reg property) might be lower than the device full size which means that the above cycle will result in a data bus exception. This change fixes it by reading the 'addr_size' during probe() and also use that as one possible upper limit.
Signed-off-by: Nuno Sá <nuno...@analog.com> --- v2: * Fix compilation when CONFIG_CFI_FLASH is not set. Done by redefining cfi_flash_bank_size() when CONFIG_CFI_FLASH is set (by returning dts size). v3: * Fix another compilation warning by explicitly casting to unsigned long in cfi_flash_bank_size() Stefan, I did ran a world build [1] by opening a PR in github (to force CI to run). However I had to bypass the pytest stage (it was giving me some unrelated problems) and there are a couple of jobs failing but the errors apparently are not related to this patchset. Hopefully things now pass in your tests. [1]: https://github.com/u-boot/u-boot/pull/281 drivers/mtd/cfi_flash.c | 11 +++++++++-- include/flash.h | 1 + 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f378f6fb6139..87a3daebdabe 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -116,12 +116,16 @@ phys_addr_t cfi_flash_bank_addr(int i) { return flash_info[i].base; } + +unsigned long cfi_flash_bank_size(int i) +{ + return (unsigned long)flash_info[i].addr_size; +} #else __weak phys_addr_t cfi_flash_bank_addr(int i) { return ((phys_addr_t [])CFG_SYS_FLASH_BANKS_LIST)[i]; } -#endif __weak unsigned long cfi_flash_bank_size(int i) { @@ -131,6 +135,7 @@ __weak unsigned long cfi_flash_bank_size(int i) return 0; #endif } +#endif __maybe_weak void flash_write8(u8 value, void *addr) { @@ -2492,15 +2497,17 @@ unsigned long flash_init(void) static int cfi_flash_probe(struct udevice *dev) { fdt_addr_t addr; + fdt_size_t size; int idx; for (idx = 0; idx < CFI_MAX_FLASH_BANKS; idx++) { - addr = dev_read_addr_index(dev, idx); + addr = dev_read_addr_size_index(dev, idx, &size); if (addr == FDT_ADDR_T_NONE) break; flash_info[cfi_flash_num_flash_banks].dev = dev; flash_info[cfi_flash_num_flash_banks].base = addr; + flash_info[cfi_flash_num_flash_banks].addr_size = size; cfi_flash_num_flash_banks++; } gd->bd->bi_flashstart = flash_info[0].base; diff --git a/include/flash.h b/include/flash.h index 95992fa689bb..3710a2731b76 100644 --- a/include/flash.h +++ b/include/flash.h @@ -46,6 +46,7 @@ typedef struct { #ifdef CONFIG_CFI_FLASH /* DM-specific parts */ struct udevice *dev; phys_addr_t base; + phys_size_t addr_size; #endif } flash_info_t; -- 2.40.0
