On Wednesday 02 February 2011 09:16:46 Reinhard Meyer wrote: > Dear Marek Vasut, >
Hi, > > The problem is clear from this IRC log, where "vickylinuxer" described > > his grief (so I included the log, the board really doesn't build). I > > also did a quick and dirty patch (follows the log, it might give you an > > idea where it breaks, but it's a mess -- not all is relevant and it > > probably breaks it even more). > > All ATMEL AT91 boards except for AT91SAM9260ek (which I fixed) boards are > currently broken. People are working towards bringing the others in-line > again, but that will take time. All right. No need to worry, we all are busy :) > > > diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c > > index bfa1f3a..1cc8bc0 100644 > > --- a/drivers/serial/atmel_usart.c > > +++ b/drivers/serial/atmel_usart.c > > @@ -23,6 +23,7 @@ > > > > #include <asm/io.h> > > #include <asm/arch/clk.h> > > > > +#include <asm/arch/hardware.h> > > > > #include <asm/arch/memory-map.h> > > Things like that are fixed at u-boot-atmel.git/rework101228... Ok, good to know. > > > diff --git a/drivers/spi/atmel_dataflash_spi.c > > b/drivers/spi/atmel_dataflash_spi.c index 4a5c4aa..d5215c0 100644 > > --- a/drivers/spi/atmel_dataflash_spi.c > > +++ b/drivers/spi/atmel_dataflash_spi.c > > @@ -158,12 +158,12 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc > > pDesc) > > > > } > > > > /* arm simple, non interrupt dependent timer */ > > > > - reset_timer_masked(); > > + reset_timer(); > > NO. reset_timer() is not acceptable anymore. A fix is already in the list, > I just need some time to handle it all:) Ok, it was just a very quick thing with no thinking involved. > > > diff --git a/include/configs/at91sam9263ek.h > > b/include/configs/at91sam9263ek.h index f6cb406..3db8bd0 100644 > > --- a/include/configs/at91sam9263ek.h > > +++ b/include/configs/at91sam9263ek.h > > @@ -27,6 +27,9 @@ > > > > #ifndef __CONFIG_H > > #define __CONFIG_H > > > > +#define CONFIG_AT91_LEGACY > > There should be no need for LEGACY anymore. > > I have project deadlines I must meet first, then I will handle all > accumulated AT91 patches. Ok, as I don't have any AT91 hardware, I can't help anymore :) Cheers > > Best Regards, > Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
