On 4/11/23 08:53, Patrice CHOTARD wrote:
> Hi Christophe
> 
> On 3/30/23 11:16, Christophe Kerello wrote:
>> Remove the EDO mode support from as the FMC2 controller does not
>> support the feature.
>>
>> Signed-off-by: Christophe Kerello <christophe.kere...@foss.st.com>
>> ---
>>
>>  drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c 
>> b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> index fb3279b405e..69dbb629e93 100644
>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>> @@ -735,6 +735,9 @@ static int stm32_fmc2_nfc_setup_interface(struct 
>> mtd_info *mtd, int chipnr,
>>      if (IS_ERR(sdrt))
>>              return PTR_ERR(sdrt);
>>  
>> +    if (sdrt->tRC_min < 30000)
>> +            return -EOPNOTSUPP;
>> +
>>      if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
>>              return 0;
>>  
> 
> Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
> 
> Thanks
> Patrice



Applied on u-boot-stm/master, thanks

Patrice

Reply via email to