Hello again everyone! This patch series syncs TI's am62ax device tree files with what has been merged in the v6.3-rc6 of the Linux Kernel. This series will also enable YMODEM support to make automated testing (which uses the UART boot method to load the bootloaders into the SoC)
Thanks for reviewing ~Bryan Changes from v2: [1] - pulled linux dtbs from v6.3-rc6 instead of -rc4 Changed from v1: [0] - Rebased on top of -next branch - dropped 'u-boot,dm-spl' for the new 'bootph-pre-ram' properties [0] https://lore.kernel.org/u-boot/20230327184035.2128786-1...@ti.com/ [1] https://lore.kernel.org/u-boot/20230402213617.1759491-1...@ti.com/ Bryan Brattlof (4): arm: dts: sync am62ax dtbs with linux v6.3-rc6 arm: dts: add DMA and CPSW nodes for uboot configs: enable net features for am62ax configs: am62ax: enable ymodem support for a53 spl Vignesh Raghavendra (1): dma: ti: k3-udma: Introduce DMA support for the am62ax arch/arm/dts/k3-am62a-main.dtsi | 365 ++++++++++++++++++++++++++ arch/arm/dts/k3-am62a-mcu.dtsi | 51 ++++ arch/arm/dts/k3-am62a-wakeup.dtsi | 2 +- arch/arm/dts/k3-am62a7-r5-sk.dts | 8 + arch/arm/dts/k3-am62a7-sk-u-boot.dtsi | 26 +- arch/arm/dts/k3-am62a7-sk.dts | 75 +++++- arch/arm/dts/k3-am62a7.dtsi | 1 + configs/am62ax_evm_a53_defconfig | 7 +- drivers/dma/ti/Makefile | 1 + drivers/dma/ti/k3-psil-am62a.c | 196 ++++++++++++++ drivers/dma/ti/k3-psil-priv.h | 1 + drivers/dma/ti/k3-psil.c | 2 + 12 files changed, 729 insertions(+), 6 deletions(-) create mode 100644 drivers/dma/ti/k3-psil-am62a.c base-commit: a25dcda452bf6a6de72764a8d990d72e5def643d -- 2.40.0
