Drop the i2c and mux description, since we have it on main board dts.
Signed-off-by: Nishanth Menon <n...@ti.com>
---
Again causes a bisect break at this point due to some weird dependency
with r5 which I could not cleanly resolve.
arch/arm/dts/k3-am642-evm-u-boot.dtsi | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/k3-am642-evm-u-boot.dtsi
b/arch/arm/dts/k3-am642-evm-u-boot.dtsi
index c8fd08885366..6e85101f134e 100644
--- a/arch/arm/dts/k3-am642-evm-u-boot.dtsi
+++ b/arch/arm/dts/k3-am642-evm-u-boot.dtsi
@@ -34,21 +34,14 @@
&main_pmx0 {
bootph-pre-ram;
- main_i2c0_pins_default: main-i2c0-pins-default {
- bootph-pre-ram;
- pinctrl-single,pins = <
- AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18)
I2C0_SCL */
- AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18)
I2C0_SDA */
- >;
- };
+};
+
+&main_i2c0_pins_default {
+ bootph-pre-ram;
};
&main_i2c0 {
- status = "okay";
bootph-pre-ram;
- pinctrl-names = "default";
- pinctrl-0 = <&main_i2c0_pins_default>;
- clock-frequency = <400000>;
};
&main_uart0 {
--
2.40.0
