Hi Nikhil,
On Thu, 30 Mar 2023 at 01:01, Nikhil M Jain <n-ja...@ti.com> wrote:
>
> To enable splash screen at SPL stage move video driver and splash screen
> framework at SPL, which will bring up image on display very quickly and
> thus have early display support in SPL.
>
> Change in V4
> - Add Reviewed-by tag in apprpriate patch
>
> Change in V3
> - Add separate video configs for SPL splash screen
> - Add rule to compile video driver in drivers/Makefile at SPL
> - Add rule to compile splash.c and splash_source.c
> - Squash drivers: video: video-uclass: Disable u-boot logo at SPL into
> drivers: video: Use CONFIG_IS_ENABLED and CONFIG_VAL
> - Split cmd/bmp.c to separate bmp functions and commands.
> - Add CONFIG_BMP and CONFIG_SPL_BMP.
> - Add rule to compile necessary files required for video driver.
> - Add rule to compile common/bmp.c
>
> Change in V2
> - Removed artifacts from bad patch apply.
>
> Nikhil M Jain (15):
> drivers: video: Kconfig: Add configs for enabling video at SPL
> drivers: video: tidss: Kconfig: Configs to enable TIDSS at SPL
> drivers: Makefile: Add rule to compile video driver
> drivers: video: Makefile: Rule to compile necessary video driver
> files.
> drivers: video: tidss: Makefile: Add condition to compile TIDSS at SPL
> common: Makefile: Add rule to compile splash and splash_source at SPL
> common: Kconfig: Add BMP configs
> cmd: bmp: Split bmp commands and functions
> cmd: Makefile: Rule to compile bmp_cmd
> common: Makefile: Rule to compile bmp.c
> drivers: video: Enable necessary video functions at SPL
> common: Enable splash functions at SPL
> include: Enable video related global data variable and splash at SPL
> common: splash: Replace CONFIG_CMD_BMP
> board: ti: am62x: evm: OSPI support for splash screen
>
> board/ti/am62x/evm.c | 8 +-
> cmd/Makefile | 3 +-
> cmd/bmp_cmd.c | 98 +++++++++++++
> common/Kconfig | 12 ++
> common/Makefile | 3 +
> {cmd => common}/bmp.c | 114 +--------------
> common/splash.c | 10 +-
> drivers/Makefile | 2 +-
> drivers/video/Kconfig | 221 ++++++++++++++++++++++++++++++
> drivers/video/Makefile | 10 ++
> drivers/video/console_normal.c | 6 +-
> drivers/video/tidss/Kconfig | 6 +
> drivers/video/tidss/Makefile | 2 +-
> drivers/video/vidconsole-uclass.c | 2 +-
> drivers/video/video-uclass.c | 14 +-
> drivers/video/video_bmp.c | 8 +-
> include/asm-generic/global_data.h | 4 +-
> include/splash.h | 6 +-
> include/video.h | 7 +
> 19 files changed, 399 insertions(+), 137 deletions(-)
> create mode 100644 cmd/bmp_cmd.c
> rename {cmd => common}/bmp.c (58%)
>
> --
> 2.34.1
>
I wasn't able to apply this to -next due to conflicts. Could you
please check that?
Regards,
Simon
