[PATCH 6/7] serial: msm_geni: Use upstream Linux bindings

[Konrad Dybcio]

The name "se" is used in upstream Linux device trees and has been for
ages, long before this U-Boot-ism was introduced. Same goes for the
existing compatible. Get rid of that.

Signed-off-by: Konrad Dybcio <konrad.dyb...@linaro.org>
---

 arch/arm/dts/sdm845.dtsi         | 4 ++--
 drivers/serial/serial_msm_geni.c | 6 ++++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi
index 607af277f8be..92bdc82177d6 100644
--- a/arch/arm/dts/sdm845.dtsi
+++ b/arch/arm/dts/sdm845.dtsi
@@ -52,10 +52,10 @@
                };
 
                debug_uart: serial@a84000 {
-                       compatible = "qcom,msm-geni-uart";
+                       compatible = "qcom,geni-debug-uart";
                        reg = <0xa84000 0x4000>;
                        reg-names = "se_phys";
-                       clock-names = "se-clk";
+                       clock-names = "se";
                        clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&qup_uart9>;
diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c
index 3943ca43e49e..6c9371c4e69d 100644
--- a/drivers/serial/serial_msm_geni.c
+++ b/drivers/serial/serial_msm_geni.c
@@ -189,7 +189,7 @@ static int geni_serial_set_clock_rate(struct udevice *dev, 
u64 rate)
        struct clk *clk;
        int ret;
 
-       clk = devm_clk_get(dev, "se-clk");
+       clk = devm_clk_get(dev, "se");
        if (!clk)
                return -EINVAL;
 
@@ -554,7 +554,9 @@ static int msm_serial_ofdata_to_platdata(struct udevice 
*dev)
 }
 
 static const struct udevice_id msm_serial_ids[] = {
-       {.compatible = "qcom,msm-geni-uart"}, {}};
+       { .compatible = "qcom,geni-debug-uart" },
+       { }
+};
 
 U_BOOT_DRIVER(serial_msm_geni) = {
        .name = "serial_msm_geni",
-- 
2.40.0