Hi Stefan, do you have any comment on this series? I delegated the patches to you in patchwork already :) No seriously, the patches look sane and are in accordance to what is done in Linux....
> This field will be used to indicate the write buffer size > of the MTD device. UBI will set it's minimal I/O unit size > (min_io_size) to the indicated write buffer size. By this > change we intend to fix failed recovery of UBIFS partitions > we currently observe on NOR flash when mounting the partition > after unclean unmount. > > Currently the min_io_size is set to mtd->writesize (which is 1 > byte for NOR flash). But flash programming is often done from > prepared write buffer containing multiple bytes and is performed > in one programming operation which could be interrupted by a power > cut or a system reset causing corrupted (partially written) areas > in a flash sector. Knowing the size of potentially corrupted areas > UBIFS scanning and recovery algorithms are able to perform > successful recovery. > > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> Thanks Detlev -- vi vi vi - the roman numeral of the beast. -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
