Thierry, thank you very much for a quick test.
Tom, should I amend patches and upload the next iteration of patchset
with Thierry's tested-by or, if no more objections/comments there are,
you will add Thierry's tested-by on your own?
Best regards.
Svyatoslav R.
вт, 14 лют. 2023 р. о 16:00 Thierry Reding <thierry.red...@gmail.com> пише:
>
> On Fri, Feb 03, 2023 at 11:26:24AM +0200, Svyatoslav Ryhel wrote:
> > List of changes in patch set:
> > - add missing EXTPERIPH clocks for t30
> > - swap host1x and disp1 clock parents (as they should be)
> > - add clk_id_to_pll_id and clock_decode_pair helpers to use
> > dts deeper (in tegra clocks often go in pair child - parent)
> > - include PLLD setup in T30 (DISP1 may use it as parent on
> > some device)
> > - fix Tegra PWM parent clock inline with linux
> > - Tegra SLINK: patch to accept any word length (unlike 8bit
> > aligned which was before)
> > - provide default USB gadget setup for existing Nvidia boards
> > - add late init function to be able to configure pre-boot stage
> > (like uncovering serial number or setting mac address)
> > - create common pre-dm i2c write for PMIC (used on T30 and T124
> > to configure basic PMIC voltages required to boot like cpu and
> > core voltages)
> > - expose crypto module for all Tegra SoCs and implement BCT patching
> > (ability to update bootloader from u-boot on production devices
> > without need in host PC)
> >
> > ---
> > Changelog from v2
> > - fixed T114 TEGRA114_CLK_PLL_E_OUT0
> > - adjusted pre-dm i2c write commit description
> > - added description file for ebtupdate command
> > - minor improvements of bct.c comments
> >
> > Changelog from v1
> > - rebased to latest u-boot master
> > - PLLD setup for T30 moved specifically into T30 area
> > ---
> >
> > Maxim Schwalm (1):
> > ARM: tegra: provide default USB gadget setup
> >
> > Ramin Khonsari (1):
> > ARM: tegra30: implement BCT patching
> >
> > Svyatoslav Ryhel (14):
> > tegra30: clock: add EXTPERIPH
> > ARM: t20/t30: swap host1x and disp1 clock parents
> > ARM: tegra: clock: add clk_id_to_pll_id helper
> > ARM: tegra: clock: add clock_decode_pair helper
> > ARM: tegra30: add PLLD to pll setup
> > ARM: tegra: Fix Tegra PWM parent clock
> > spi: tegra20_slink: accept any word length
> > ARM: tegra: add late init support
> > ARM: tegra: create common pre-dm i2c write
> > board: tegra124: switch to updated pre-dm i2c write
> > board: tegra30: switch to updated pre-dm i2c write
> > ARM: tegra: expose crypto module for all Tegra SoCs
> > ARM: tegra: crypto: extend crypto functional
> > ARM: tegra20: implement BCT patching
> >
> > arch/arm/dts/tegra114.dtsi | 2 +-
> > arch/arm/dts/tegra124.dtsi | 2 +-
> > arch/arm/include/asm/arch-tegra/clock.h | 21 +++++
> > arch/arm/include/asm/arch-tegra/crypto.h | 47 ++++++++++
> > arch/arm/include/asm/arch-tegra/sys_proto.h | 6 ++
> > arch/arm/include/asm/arch-tegra/tegra_i2c.h | 17 ++++
> > .../include/asm/arch-tegra30/clock-tables.h | 6 +-
> > arch/arm/mach-tegra/Kconfig | 14 +++
> > arch/arm/mach-tegra/Makefile | 1 +
> > arch/arm/mach-tegra/board2.c | 2 +
> > arch/arm/mach-tegra/clock.c | 23 +++++
> > arch/arm/mach-tegra/cpu.h | 1 -
> > arch/arm/mach-tegra/{tegra20 => }/crypto.c | 63 +++++++++----
> > arch/arm/mach-tegra/tegra114/clock.c | 39 +++++++-
> > arch/arm/mach-tegra/tegra124/clock.c | 40 ++++++++-
> > arch/arm/mach-tegra/tegra124/cpu.c | 4 +
> > arch/arm/mach-tegra/tegra20/Kconfig | 1 +
> > arch/arm/mach-tegra/tegra20/Makefile | 7 +-
> > arch/arm/mach-tegra/tegra20/bct.c | 79 ++++++++++++++++
> > arch/arm/mach-tegra/tegra20/bct.h | 42 +++++++++
> > arch/arm/mach-tegra/tegra20/clock.c | 43 ++++++++-
> > arch/arm/mach-tegra/tegra20/crypto.h | 19 ----
> > arch/arm/mach-tegra/tegra210/clock.c | 39 +++++++-
> > arch/arm/mach-tegra/tegra30/Kconfig | 8 --
> > arch/arm/mach-tegra/tegra30/Makefile | 1 +
> > arch/arm/mach-tegra/tegra30/bct.c | 79 ++++++++++++++++
> > arch/arm/mach-tegra/tegra30/bct.h | 42 +++++++++
> > arch/arm/mach-tegra/tegra30/clock.c | 90 +++++++++++++++++--
> > arch/arm/mach-tegra/tegra30/cpu.c | 55 +-----------
> > board/avionic-design/tec-ng/Makefile | 4 +-
> > board/avionic-design/tec-ng/tec-ng-spl.c | 34 +++++++
> > board/nvidia/beaver/Makefile | 2 +
> > board/nvidia/beaver/beaver-spl.c | 43 +++++++++
> > board/nvidia/cardhu/Makefile | 4 +-
> > board/nvidia/cardhu/cardhu-spl.c | 43 +++++++++
> > board/nvidia/venice2/as3722_init.c | 65 +++++++++-----
> > board/nvidia/venice2/as3722_init.h | 43 ---------
> > board/toradex/apalis-tk1/as3722_init.c | 85 ++++++++++--------
> > board/toradex/apalis-tk1/as3722_init.h | 40 ---------
> > board/toradex/apalis_t30/Makefile | 2 +
> > board/toradex/apalis_t30/apalis_t30-spl.c | 34 +++++++
> > board/toradex/colibri_t30/Makefile | 2 +
> > board/toradex/colibri_t30/colibri_t30-spl.c | 34 +++++++
> > configs/beaver_defconfig | 3 -
> > configs/cei-tk1-som_defconfig | 3 -
> > configs/dalmore_defconfig | 3 -
> > configs/jetson-tk1_defconfig | 3 -
> > configs/nyan-big_defconfig | 3 -
> > configs/p2371-0000_defconfig | 3 -
> > configs/p2371-2180_defconfig | 3 -
> > configs/p2571_defconfig | 3 -
> > configs/p3450-0000_defconfig | 3 -
> > configs/venice2_defconfig | 3 -
> > doc/usage/cmd/ebtupdate.rst | 70 +++++++++++++++
> > drivers/pwm/tegra_pwm.c | 10 ++-
> > drivers/spi/tegra20_slink.c | 19 ++--
> > drivers/usb/gadget/Kconfig | 3 +
> > 57 files changed, 1051 insertions(+), 309 deletions(-)
> > create mode 100644 arch/arm/include/asm/arch-tegra/crypto.h
> > rename arch/arm/mach-tegra/{tegra20 => }/crypto.c (68%)
> > create mode 100644 arch/arm/mach-tegra/tegra20/bct.c
> > create mode 100644 arch/arm/mach-tegra/tegra20/bct.h
> > delete mode 100644 arch/arm/mach-tegra/tegra20/crypto.h
> > create mode 100644 arch/arm/mach-tegra/tegra30/bct.c
> > create mode 100644 arch/arm/mach-tegra/tegra30/bct.h
> > create mode 100644 board/avionic-design/tec-ng/tec-ng-spl.c
> > create mode 100644 board/nvidia/beaver/beaver-spl.c
> > create mode 100644 board/nvidia/cardhu/cardhu-spl.c
> > delete mode 100644 board/nvidia/venice2/as3722_init.h
> > delete mode 100644 board/toradex/apalis-tk1/as3722_init.h
> > create mode 100644 board/toradex/apalis_t30/apalis_t30-spl.c
> > create mode 100644 board/toradex/colibri_t30/colibri_t30-spl.c
> > create mode 100644 doc/usage/cmd/ebtupdate.rst
>
> I haven't tested this exhaustively, just merely made sure that it can
> PXE boot into Linux. Seems to work fine on Beaver and Jetson TK1, so:
>
> Tested-by: Thierry Reding <tred...@nvidia.com>
