Dear Wolfgang, Thank you very much for your hints. This is a good staring point for me to continue with u-boot and Compact Flash.
Best Regards Miroslaw Dach -----Original Message----- From: Wolfgang Denk [mailto:w...@denx.de] Sent: Sat 1/22/2011 8:39 PM To: Dach Miroslaw Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] U-boot Config Parameters on Compact Flash Dear "Dach Miroslaw", In message <1b4f8000449511488d1a640dd6deca350392a...@mailbox0a.psi.ch> you wrote: > > Could you please direct me to some manual/"how to" to find out how to > configure IDE > access by means of the CONFIG_IDE_* . I have examined several header > files in u-boot/include/configs > and it seems to be that CONFIG_ATA_* could be/should be used in > conjunction with CONFIG_IDE_*? I'm not an expert with Xilinx FPGAs and have no idea what needs to be done to enable the ACE in them. A "grep SYS_ACE" in include/configs/* turns up only the icon and katmai boards that appearently enable a Xilinx ACE controll, but these are PPC440SPe boards, i. e. no Xilinx FPGA based solutions. You will have to read the respective user manuals yourself. Or hire an expert. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Any sufficiently advanced technology is indistinguishable from magic. Clarke's Third Law - _Profiles of the Future_ (1962; rev. 1973) ``Hazards of Prophecy: The Failure of Imagination'' _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
