On Fri, 2023-02-10 at 11:32 +0100, Marek Vasut wrote:
> On 2/10/23 09:33, Chunfeng Yun wrote:
> [...]
> > @@ -50,6 +50,27 @@
> > #define IPPC_U3_CTRL(p) (IPPC_U3_CTRL_0P + ((p) * 0x08))
> > #define IPPC_U2_CTRL(p) (IPPC_U2_CTRL_0P + ((p) * 0x08))
> >
> > +/* xHCI CSR */
> > +#define LS_EOF_CFG 0x930
> > +#define LSEOF_OFFSET 0x89
> > +
> > +#define FS_EOF_CFG 0x934
> > +#define FSEOF_OFFSET 0x2e
> > +
> > +#define SS_GEN1_EOF_CFG 0x93c
> > +#define SSG1EOF_OFFSET 0x78
> > +
> > +#define HFCNTR_CFG 0x944
> > +#define ITP_DELTA_CLK (0xa << 1)
> > +#define ITP_DELTA_CLK_MASK GENMASK(5, 1)
> > +#define FRMCNT_LEV1_RANG (0x12b << 8)
>
> Look at FIELD_PREP() macro, that should let you avoid the (0x12b <<
> 8) .
Seems not use FIELD_PREP() macro here.
It's not a mask, it's the value set in below mask
FRMCNT_LEV1_RANG_MASK.
>
> > +#define FRMCNT_LEV1_RANG_MASK GENMASK(19, 8)
> > +
> > +#define SS_GEN2_EOF_CFG 0x990
> > +#define SSG2EOF_OFFSET 0x3c
> > +
> > +#define XSEOF_OFFSET_MASK GENMASK(11, 0)
>
> [...]
>
> > @@ -308,6 +354,7 @@ static int xhci_mtk_remove(struct udevice *dev)
> >
> > static const struct udevice_id xhci_mtk_ids[] = {
> > { .compatible = "mediatek,mtk-xhci" },
> > + { .compatible = "mediatek,mt8195-xhci" },
>
> Is the extra compatible string really needed, can't the driver match
> on
> the generic one ?
These settings are a workaround only for mt8195 to fix HW issue, can't
use generic compatible.
Thanks a lot
