Sorry for not mentioning the file name. its here uboot/arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S and also in uboot/board/samsung/smdk2410/lowlevel_init.S Thanks for all your responses so far people.
Reinhard Meyer wrote: > > Dear Eric Bénard wrote: >> Hi, >> >> On 22/01/2011 08:39, Reinhard Meyer wrote: >>> I am not aware of any > ADD: working >>> AT91SAM9xxx systems right now that uses low-level init, it >>> would only make sense for those that boot directly from NOR, without >>> AT91BOOTSTRAP involved. >> >> cpu9260 (at91sam9260 / 9g20 based) is using low-level init as it boots >> from >> NOR and is not using at91bootstrap. > > Those CPUs are broken since relocation was introduced. It would be nice to > see > them demonstrated working out of NOR with low level init enabled... > > Best Regards, > Reinhard > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > -- View this message in context: http://old.nabble.com/A-question-in-lowlevel_init.S-tp30734554p30737145.html Sent from the Uboot - Users mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
