On Thu, 20 Jan 2011 22:45:34 -0600 Aggrwal Poonam-B10812 <b10...@freescale.com> wrote:
> > -----Original Message----- > > From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] > > On Behalf Of Wood Scott-B07421 > > Sent: Thursday, January 20, 2011 1:28 AM > > To: chr...@cyberswitching.com > > Cc: u-boot@lists.denx.de > > Subject: Re: [U-Boot] environmental "baudrate" not used at boot up > > > > The full NAND code only works after relocation. So you cannot read out > > the NAND environment, in the normal way, before serial init -- you get > > the default environment instead. > > > > If you are booting from NAND, I suggest using CONFIG_NAND_ENV_DST to have > > the NAND SPL load the environment at the same time as it loads U-Boot. > > If you're using some preloader other than U-Boot's NAND SPL, you'll need > > to see if it supports something similar. > Hello Scott > > Is this feature available/tested on any FSL platform. The code you pointed to > does not seem to be used by FSL platforms. > > It would be good idea to pull this in for P1/P2 RDB nand boot loader. It is currently only supported in nand_boot.c, but it should be trivial to add it to nand_boot_fsl_elbc.c. Just copy the extra nand_boot() invocations. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
