The node name should follow the generic name list in DT specification. This moves "reset" to "reset-controller", "hs-phy" and "ss-phy" to "phy" in the USB glue node.
And the node should have reg property to define the register region. Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com> --- arch/arm/dts/uniphier-ld20.dtsi | 15 ++++++++------- arch/arm/dts/uniphier-pro4.dtsi | 7 ++++--- arch/arm/dts/uniphier-pro5.dtsi | 15 ++++++++------- arch/arm/dts/uniphier-pxs2.dtsi | 20 +++++++++++--------- arch/arm/dts/uniphier-pxs3.dtsi | 20 +++++++++++--------- 5 files changed, 42 insertions(+), 35 deletions(-) diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi index 4549935c42..21a431ab7f 100644 --- a/arch/arm/dts/uniphier-ld20.dtsi +++ b/arch/arm/dts/uniphier-ld20.dtsi @@ -765,11 +765,12 @@ usb-glue@65b00000 { compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x4000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65b00000 0x400>; - usb_rst: reset@0 { + usb_rst: reset-controller@0 { compatible = "socionext,uniphier-ld20-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -815,7 +816,7 @@ resets = <&sys_rst 14>; }; - usb_hsphy0: hs-phy@200 { + usb_hsphy0: phy@200 { compatible = "socionext,uniphier-ld20-usb3-hsphy"; reg = <0x200 0x10>; #phy-cells = <0>; @@ -829,7 +830,7 @@ <&usb_hs_i0>; }; - usb_hsphy1: hs-phy@210 { + usb_hsphy1: phy@210 { compatible = "socionext,uniphier-ld20-usb3-hsphy"; reg = <0x210 0x10>; #phy-cells = <0>; @@ -843,7 +844,7 @@ <&usb_hs_i0>; }; - usb_hsphy2: hs-phy@220 { + usb_hsphy2: phy@220 { compatible = "socionext,uniphier-ld20-usb3-hsphy"; reg = <0x220 0x10>; #phy-cells = <0>; @@ -857,7 +858,7 @@ <&usb_hs_i2>; }; - usb_hsphy3: hs-phy@230 { + usb_hsphy3: phy@230 { compatible = "socionext,uniphier-ld20-usb3-hsphy"; reg = <0x230 0x10>; #phy-cells = <0>; @@ -871,7 +872,7 @@ <&usb_hs_i2>; }; - usb_ssphy0: ss-phy@300 { + usb_ssphy0: phy@300 { compatible = "socionext,uniphier-ld20-usb3-ssphy"; reg = <0x300 0x10>; #phy-cells = <0>; @@ -882,7 +883,7 @@ vbus-supply = <&usb_vbus0>; }; - usb_ssphy1: ss-phy@310 { + usb_ssphy1: phy@310 { compatible = "socionext,uniphier-ld20-usb3-ssphy"; reg = <0x310 0x10>; #phy-cells = <0>; diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi index 9dae4e9b23..0e0a30ab40 100644 --- a/arch/arm/dts/uniphier-pro4.dtsi +++ b/arch/arm/dts/uniphier-pro4.dtsi @@ -521,6 +521,7 @@ usb-glue@65b00000 { compatible = "socionext,uniphier-pro4-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65b00000 0x100>; @@ -534,7 +535,7 @@ resets = <&sys_rst 12>, <&sys_rst 14>; }; - usb0_ssphy: ss-phy@10 { + usb0_ssphy: phy@10 { compatible = "socionext,uniphier-pro4-usb3-ssphy"; reg = <0x10 0x10>; #phy-cells = <0>; @@ -545,7 +546,7 @@ vbus-supply = <&usb0_vbus>; }; - usb0_rst: reset@40 { + usb0_rst: reset-controller@40 { compatible = "socionext,uniphier-pro4-usb3-reset"; reg = <0x40 0x4>; #reset-cells = <1>; @@ -606,7 +607,7 @@ resets = <&sys_rst 12>, <&sys_rst 15>; }; - usb1_rst: reset@40 { + usb1_rst: reset-controller@40 { compatible = "socionext,uniphier-pro4-usb3-reset"; reg = <0x40 0x4>; #reset-cells = <1>; diff --git a/arch/arm/dts/uniphier-pro5.dtsi b/arch/arm/dts/uniphier-pro5.dtsi index 19848e36fa..6122ee6164 100644 --- a/arch/arm/dts/uniphier-pro5.dtsi +++ b/arch/arm/dts/uniphier-pro5.dtsi @@ -483,11 +483,12 @@ usb-glue@65b00000 { compatible = "socionext,uniphier-pro5-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65b00000 0x400>; - usb0_rst: reset@0 { + usb0_rst: reset-controller@0 { compatible = "socionext,uniphier-pro5-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -506,7 +507,7 @@ resets = <&sys_rst 12>, <&sys_rst 14>; }; - usb0_hsphy0: hs-phy@280 { + usb0_hsphy0: phy@280 { compatible = "socionext,uniphier-pro5-usb3-hsphy"; reg = <0x280 0x10>; #phy-cells = <0>; @@ -517,7 +518,7 @@ vbus-supply = <&usb0_vbus0>; }; - usb0_ssphy0: ss-phy@380 { + usb0_ssphy0: phy@380 { compatible = "socionext,uniphier-pro5-usb3-ssphy"; reg = <0x380 0x10>; #phy-cells = <0>; @@ -551,7 +552,7 @@ #size-cells = <1>; ranges = <0 0x65d00000 0x400>; - usb1_rst: reset@0 { + usb1_rst: reset-controller@0 { compatible = "socionext,uniphier-pro5-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -579,7 +580,7 @@ resets = <&sys_rst 12>, <&sys_rst 15>; }; - usb1_hsphy0: hs-phy@280 { + usb1_hsphy0: phy@280 { compatible = "socionext,uniphier-pro5-usb3-hsphy"; reg = <0x280 0x10>; #phy-cells = <0>; @@ -590,7 +591,7 @@ vbus-supply = <&usb1_vbus0>; }; - usb1_hsphy1: hs-phy@290 { + usb1_hsphy1: phy@290 { compatible = "socionext,uniphier-pro5-usb3-hsphy"; reg = <0x290 0x10>; #phy-cells = <0>; @@ -601,7 +602,7 @@ vbus-supply = <&usb1_vbus1>; }; - usb1_ssphy0: ss-phy@380 { + usb1_ssphy0: phy@380 { compatible = "socionext,uniphier-pro5-usb3-ssphy"; reg = <0x380 0x10>; #phy-cells = <0>; diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index 7a8b6c10f4..cafa14e22e 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -612,11 +612,12 @@ usb-glue@65b00000 { compatible = "socionext,uniphier-pxs2-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65b00000 0x400>; - usb0_rst: reset@0 { + usb0_rst: reset-controller@0 { compatible = "socionext,uniphier-pxs2-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -644,7 +645,7 @@ resets = <&sys_rst 14>; }; - usb0_hsphy0: hs-phy@200 { + usb0_hsphy0: phy@200 { compatible = "socionext,uniphier-pxs2-usb3-hsphy"; reg = <0x200 0x10>; #phy-cells = <0>; @@ -655,7 +656,7 @@ vbus-supply = <&usb0_vbus0>; }; - usb0_hsphy1: hs-phy@210 { + usb0_hsphy1: phy@210 { compatible = "socionext,uniphier-pxs2-usb3-hsphy"; reg = <0x210 0x10>; #phy-cells = <0>; @@ -666,7 +667,7 @@ vbus-supply = <&usb0_vbus1>; }; - usb0_ssphy0: ss-phy@300 { + usb0_ssphy0: phy@300 { compatible = "socionext,uniphier-pxs2-usb3-ssphy"; reg = <0x300 0x10>; #phy-cells = <0>; @@ -677,7 +678,7 @@ vbus-supply = <&usb0_vbus0>; }; - usb0_ssphy1: ss-phy@310 { + usb0_ssphy1: phy@310 { compatible = "socionext,uniphier-pxs2-usb3-ssphy"; reg = <0x310 0x10>; #phy-cells = <0>; @@ -726,11 +727,12 @@ usb-glue@65d00000 { compatible = "socionext,uniphier-pxs2-dwc3-glue", "simple-mfd"; + reg = <0x65d00000 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65d00000 0x400>; - usb1_rst: reset@0 { + usb1_rst: reset-controller@0 { compatible = "socionext,uniphier-pxs2-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -758,7 +760,7 @@ resets = <&sys_rst 15>; }; - usb1_hsphy0: hs-phy@200 { + usb1_hsphy0: phy@200 { compatible = "socionext,uniphier-pxs2-usb3-hsphy"; reg = <0x200 0x10>; #phy-cells = <0>; @@ -769,7 +771,7 @@ vbus-supply = <&usb1_vbus0>; }; - usb1_hsphy1: hs-phy@210 { + usb1_hsphy1: phy@210 { compatible = "socionext,uniphier-pxs2-usb3-hsphy"; reg = <0x210 0x10>; #phy-cells = <0>; @@ -780,7 +782,7 @@ vbus-supply = <&usb1_vbus1>; }; - usb1_ssphy0: ss-phy@300 { + usb1_ssphy0: phy@300 { compatible = "socionext,uniphier-pxs2-usb3-ssphy"; reg = <0x300 0x10>; #phy-cells = <0>; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index 004656c992..1b0f49e00d 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -614,11 +614,12 @@ usb-glue@65b00000 { compatible = "socionext,uniphier-pxs3-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65b00000 0x400>; - usb0_rst: reset@0 { + usb0_rst: reset-controller@0 { compatible = "socionext,uniphier-pxs3-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -646,7 +647,7 @@ resets = <&sys_rst 12>; }; - usb0_hsphy0: hs-phy@200 { + usb0_hsphy0: phy@200 { compatible = "socionext,uniphier-pxs3-usb3-hsphy"; reg = <0x200 0x10>; #phy-cells = <0>; @@ -660,7 +661,7 @@ <&usb_hs_i0>; }; - usb0_hsphy1: hs-phy@210 { + usb0_hsphy1: phy@210 { compatible = "socionext,uniphier-pxs3-usb3-hsphy"; reg = <0x210 0x10>; #phy-cells = <0>; @@ -674,7 +675,7 @@ <&usb_hs_i0>; }; - usb0_ssphy0: ss-phy@300 { + usb0_ssphy0: phy@300 { compatible = "socionext,uniphier-pxs3-usb3-ssphy"; reg = <0x300 0x10>; #phy-cells = <0>; @@ -685,7 +686,7 @@ vbus-supply = <&usb0_vbus0>; }; - usb0_ssphy1: ss-phy@310 { + usb0_ssphy1: phy@310 { compatible = "socionext,uniphier-pxs3-usb3-ssphy"; reg = <0x310 0x10>; #phy-cells = <0>; @@ -735,11 +736,12 @@ usb-glue@65d00000 { compatible = "socionext,uniphier-pxs3-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x65d00000 0x400>; - usb1_rst: reset@0 { + usb1_rst: reset-controller@0 { compatible = "socionext,uniphier-pxs3-usb3-reset"; reg = <0x0 0x4>; #reset-cells = <1>; @@ -767,7 +769,7 @@ resets = <&sys_rst 13>; }; - usb1_hsphy0: hs-phy@200 { + usb1_hsphy0: phy@200 { compatible = "socionext,uniphier-pxs3-usb3-hsphy"; reg = <0x200 0x10>; #phy-cells = <0>; @@ -782,7 +784,7 @@ <&usb_hs_i2>; }; - usb1_hsphy1: hs-phy@210 { + usb1_hsphy1: phy@210 { compatible = "socionext,uniphier-pxs3-usb3-hsphy"; reg = <0x210 0x10>; #phy-cells = <0>; @@ -797,7 +799,7 @@ <&usb_hs_i2>; }; - usb1_ssphy0: ss-phy@300 { + usb1_ssphy0: phy@300 { compatible = "socionext,uniphier-pxs3-usb3-ssphy"; reg = <0x300 0x10>; #phy-cells = <0>; -- 2.25.1