Hi Simon
On 1/23/23 23:00, Simon Glass wrote:
> CONFIG options must not use lower-case letter. Convert this and related
> ones to upper case.
>
> Signed-off-by: Simon Glass <s...@chromium.org>
> ---
>
> arch/arm/dts/Makefile | 2 +-
> arch/arm/mach-stm32mp/Kconfig | 4 ++--
> arch/arm/mach-stm32mp/Kconfig.13x | 4 ++--
> arch/arm/mach-stm32mp/Makefile | 2 +-
> arch/arm/mach-stm32mp/cmd_stm32key.c | 10 +++++-----
> arch/arm/mach-stm32mp/fdt.c | 4 ++--
> arch/arm/mach-stm32mp/include/mach/stm32.h | 6 +++---
> board/st/common/Kconfig | 2 +-
> board/st/stm32mp1/Kconfig | 2 +-
> configs/stm32mp13_defconfig | 4 ++--
> drivers/clk/stm32/Kconfig | 2 +-
> 11 files changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index c184c802b45..dc8dcdff218 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1215,7 +1215,7 @@ dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
>
> dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
>
> -dtb-$(CONFIG_STM32MP13x) += \
> +dtb-$(CONFIG_STM32MP13X) += \
> stm32mp135f-dk.dtb
>
> dtb-$(CONFIG_STM32MP15x) += \
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index db47baba6d1..cf3196b3b3a 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -37,7 +37,7 @@ choice
> prompt "Select STMicroelectronics STM32MPxxx Soc"
> default STM32MP15x
>
> -config STM32MP13x
> +config STM32MP13X
> bool "Support STMicroelectronics STM32MP13x Soc"
> select ARM_SMCCC
> select CPU_V7A
> @@ -103,7 +103,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
>
> config STM32_ETZPC
> bool "STM32 Extended TrustZone Protection"
> - depends on STM32MP15x || STM32MP13x
> + depends on STM32MP15x || STM32MP13X
> default y
> imply BOOTP_SERVERIP
> help
> diff --git a/arch/arm/mach-stm32mp/Kconfig.13x
> b/arch/arm/mach-stm32mp/Kconfig.13x
> index acc02a5a187..4d74b35055b 100644
> --- a/arch/arm/mach-stm32mp/Kconfig.13x
> +++ b/arch/arm/mach-stm32mp/Kconfig.13x
> @@ -1,10 +1,10 @@
> -if STM32MP13x
> +if STM32MP13X
>
> choice
> prompt "STM32MP13x board select"
> optional
>
> -config TARGET_ST_STM32MP13x
> +config TARGET_ST_STM32MP13X
> bool "STMicroelectronics STM32MP13x boards"
> imply BOOTSTAGE
> imply CMD_BOOTSTAGE
> diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
> index a19b2797c8b..90c7c121ec4 100644
> --- a/arch/arm/mach-stm32mp/Makefile
> +++ b/arch/arm/mach-stm32mp/Makefile
> @@ -8,7 +8,7 @@ obj-y += dram_init.o
> obj-y += syscon.o
> obj-y += bsec.o
>
> -obj-$(CONFIG_STM32MP13x) += stm32mp13x.o
> +obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
> obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
>
> obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
> diff --git a/arch/arm/mach-stm32mp/cmd_stm32key.c
> b/arch/arm/mach-stm32mp/cmd_stm32key.c
> index 85be8e23bdb..96407cd9b18 100644
> --- a/arch/arm/mach-stm32mp/cmd_stm32key.c
> +++ b/arch/arm/mach-stm32mp/cmd_stm32key.c
> @@ -18,7 +18,7 @@
> * STM32MP13x: 0b111111 = 0x3F for OTP_SECURED closed device
> */
> #define STM32_OTP_CLOSE_ID 0
> -#define STM32_OTP_STM32MP13x_CLOSE_MASK 0x3F
> +#define STM32_OTP_STM32MP13X_CLOSE_MASK 0x3F
> #define STM32_OTP_STM32MP15x_CLOSE_MASK BIT(6)
>
> /* PKH is the first element of the key list */
> @@ -60,7 +60,7 @@ static u8 stm32key_index;
>
> static u8 get_key_nb(void)
> {
> - if (IS_ENABLED(CONFIG_STM32MP13x))
> + if (IS_ENABLED(CONFIG_STM32MP13X))
> return ARRAY_SIZE(stm32mp13_list);
>
> if (IS_ENABLED(CONFIG_STM32MP15x))
> @@ -69,7 +69,7 @@ static u8 get_key_nb(void)
>
> static const struct stm32key *get_key(u8 index)
> {
> - if (IS_ENABLED(CONFIG_STM32MP13x))
> + if (IS_ENABLED(CONFIG_STM32MP13X))
> return &stm32mp13_list[index];
>
> if (IS_ENABLED(CONFIG_STM32MP15x))
> @@ -78,8 +78,8 @@ static const struct stm32key *get_key(u8 index)
>
> static u32 get_otp_close_mask(void)
> {
> - if (IS_ENABLED(CONFIG_STM32MP13x))
> - return STM32_OTP_STM32MP13x_CLOSE_MASK;
> + if (IS_ENABLED(CONFIG_STM32MP13X))
> + return STM32_OTP_STM32MP13X_CLOSE_MASK;
>
> if (IS_ENABLED(CONFIG_STM32MP15x))
> return STM32_OTP_STM32MP15x_CLOSE_MASK;
> diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c
> index 3b4c05d7451..6b69542ecfc 100644
> --- a/arch/arm/mach-stm32mp/fdt.c
> +++ b/arch/arm/mach-stm32mp/fdt.c
> @@ -270,7 +270,7 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node)
> int offset, shift;
> u32 addr, status, decprot[ETZPC_DECPROT_NB];
>
> - if (IS_ENABLED(CONFIG_STM32MP13x)) {
> + if (IS_ENABLED(CONFIG_STM32MP13X)) {
> array = stm32mp13_ip_addr;
> array_size = ARRAY_SIZE(stm32mp13_ip_addr);
> }
> @@ -491,7 +491,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
> cpu = get_cpu_type();
> get_soc_name(name);
>
> - if (IS_ENABLED(CONFIG_STM32MP13x))
> + if (IS_ENABLED(CONFIG_STM32MP13X))
> stm32mp13_fdt_fixup(blob, soc, cpu, name);
>
> if (IS_ENABLED(CONFIG_STM32MP15x)) {
> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h
> b/arch/arm/mach-stm32mp/include/mach/stm32.h
> index c85ae6a34ee..1e1f694cb62 100644
> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
> @@ -32,7 +32,7 @@
> #define STM32_USART1_BASE 0x5C000000
> #define STM32_USART2_BASE 0x4000E000
> #endif
> -#ifdef CONFIG_STM32MP13x
> +#ifdef CONFIG_STM32MP13X
> #define STM32_USART1_BASE 0x4c000000
> #define STM32_USART2_BASE 0x4c001000
> #endif
> @@ -130,7 +130,7 @@ enum boot_device {
> #define TAMP_COPRO_STATE_CRASH 5
> #endif
>
> -#ifdef CONFIG_STM32MP13x
> +#ifdef CONFIG_STM32MP13X
> #define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(31)
> #define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30)
> #endif
> @@ -167,7 +167,7 @@ enum forced_boot_mode {
> #define BSEC_OTP_MAC 57
> #define BSEC_OTP_BOARD 59
> #endif
> -#ifdef CONFIG_STM32MP13x
> +#ifdef CONFIG_STM32MP13X
> #define BSEC_OTP_RPN 1
> #define BSEC_OTP_SERIAL 13
> #define BSEC_OTP_MAC 57
> diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
> index aba3590866e..ba17d3158d1 100644
> --- a/board/st/common/Kconfig
> +++ b/board/st/common/Kconfig
> @@ -1,7 +1,7 @@
> config CMD_STBOARD
> bool "stboard - command for OTP board information"
> depends on ARCH_STM32MP
> - default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x
> + default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13X
> help
> This compile the stboard command to
> read and write the board in the OTP.
> diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig
> index 6ab8f80fa45..7d0d41bfea0 100644
> --- a/board/st/stm32mp1/Kconfig
> +++ b/board/st/stm32mp1/Kconfig
> @@ -12,7 +12,7 @@ config SYS_CONFIG_NAME
> source "board/st/common/Kconfig"
> endif
>
> -if TARGET_ST_STM32MP13x
> +if TARGET_ST_STM32MP13X
>
> config SYS_BOARD
> default "stm32mp1"
> diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
> index ab824808f9d..7b9718400e8 100644
> --- a/configs/stm32mp13_defconfig
> +++ b/configs/stm32mp13_defconfig
> @@ -5,10 +5,10 @@ CONFIG_SYS_MALLOC_F_LEN=0x180000
> CONFIG_ENV_OFFSET=0x900000
> CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dk"
> CONFIG_SYS_PROMPT="STM32MP> "
> -CONFIG_STM32MP13x=y
> +CONFIG_STM32MP13X=y
> CONFIG_DDR_CACHEABLE_SIZE=0x10000000
> CONFIG_CMD_STM32KEY=y
> -CONFIG_TARGET_ST_STM32MP13x=y
> +CONFIG_TARGET_ST_STM32MP13X=y
> CONFIG_ENV_OFFSET_REDUND=0x940000
> # CONFIG_ARMV7_NONSEC is not set
> CONFIG_SYS_LOAD_ADDR=0xc2000000
> diff --git a/drivers/clk/stm32/Kconfig b/drivers/clk/stm32/Kconfig
> index 7a34ea23c38..7dbddd032b8 100644
> --- a/drivers/clk/stm32/Kconfig
> +++ b/drivers/clk/stm32/Kconfig
> @@ -31,7 +31,7 @@ config CLK_STM32MP1
> config CLK_STM32MP13
> bool "Enable RCC clock driver for STM32MP13"
> depends on ARCH_STM32MP && CLK
> - default y if STM32MP13x
> + default y if STM32MP13X
> select CLK_STM32_CORE
> help
> Enable the STM32 clock (RCC) driver. Enable support for
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Thanks
Patrice
