The patch adds UART support for the i.MX35 processor. Signed-off-by: Stefano Babic <sba...@denx.de> --- drivers/serial/serial_mxc.c | 15 ++++++--------- 1 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index 805f4c5..b9cf9de 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -50,17 +50,14 @@ #define UART_PHYS 0x1001b000 #elif defined(CONFIG_SYS_MX27_UART6) #define UART_PHYS 0x1001c000 -#elif defined(CONFIG_SYS_MX51_UART1) +#elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \ + defined(CONFIG_SYS_MX53_UART1) #define UART_PHYS UART1_BASE_ADDR -#elif defined(CONFIG_SYS_MX51_UART2) +#elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \ + defined(CONFIG_SYS_MX53_UART2) #define UART_PHYS UART2_BASE_ADDR -#elif defined(CONFIG_SYS_MX51_UART3) -#define UART_PHYS UART3_BASE_ADDR -#elif defined(CONFIG_SYS_MX53_UART1) -#define UART_PHYS UART1_BASE_ADDR -#elif defined(CONFIG_SYS_MX53_UART2) -#define UART_PHYS UART2_BASE_ADDR -#elif defined(CONFIG_SYS_MX53_UART3) +#elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \ + defined(CONFIG_SYS_MX53_UART3) #define UART_PHYS UART3_BASE_ADDR #else #error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver" -- 1.7.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
