e1-wan device-tree node doesn't exist. Remove related update
to avoid following warning at startup:
Loading Device Tree to 007fa000, end 007ff951 ... OK
Unable to update property /localbus/e1-wan:data-rate,
err=FDT_ERR_NOTFOUND
Unable to update property /localbus/e1-wan:channel-phase,
err=FDT_ERR_NOTFOUND
Unable to update property /localbus/e1-wan:rising-edge-sync-pulse,
err=FDT_ERR_NOTFOUND
Signed-off-by: Christophe Leroy <christophe.le...@csgroup.eu>
Reviewed-by: FRANJOU Stephane <stephane.fran...@csgroup.eu>
---
board/cssi/MCR3000/mcr3000.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/board/cssi/MCR3000/mcr3000.c b/board/cssi/MCR3000/mcr3000.c
index c20e8714949..ecc244cc124 100644
--- a/board/cssi/MCR3000/mcr3000.c
+++ b/board/cssi/MCR3000/mcr3000.c
@@ -58,8 +58,6 @@ static const uint cs1_dram_table_66[] = {
int ft_board_setup(void *blob, struct bd_info *bd)
{
- const char *sync = "receive";
-
ft_cpu_setup(blob, bd);
/* BRG */
@@ -72,16 +70,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
/* Bus Frequency for CPM */
do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1);
- /* E1 interface - Set data rate */
- do_fixup_by_path_u32(blob, "/localbus/e1-wan", "data-rate", 2, 1);
-
- /* E1 interface - Set channel phase to 0 */
- do_fixup_by_path_u32(blob, "/localbus/e1-wan", "channel-phase", 0, 1);
-
- /* E1 interface - rising edge sync pulse transmit */
- do_fixup_by_path(blob, "/localbus/e1-wan", "rising-edge-sync-pulse",
- sync, strlen(sync), 1);
-
return 0;
}
--
2.38.1
