[U-Boot] [PATCH 2/3 v2] MX51EVK: Use SWx macros in PMIC init

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.va...@gmail.com>
---
v2: Remove stray newline and useless parens

 board/freescale/mx51evk/mx51evk.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/freescale/mx51evk/mx51evk.c 
b/board/freescale/mx51evk/mx51evk.c
index 2160d5a..726ce18 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -198,17 +198,17 @@ static void power_init(void)
 
        /* Set core voltage to 1.1V */
        val = pmic_reg_read(REG_SW_0);
-       val = (val & (~0x1F)) | 0x14;
+       val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
        pmic_reg_write(REG_SW_0, val);
 
        /* Setup VCC (SW2) to 1.25 */
        val = pmic_reg_read(REG_SW_1);
-       val = (val & (~0x1F)) | 0x1A;
+       val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
        pmic_reg_write(REG_SW_1, val);
 
        /* Setup 1V2_DIG1 (SW3) to 1.25 */
        val = pmic_reg_read(REG_SW_2);
-       val = (val & (~0x1F)) | 0x1A;
+       val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
        pmic_reg_write(REG_SW_2, val);
        udelay(50);
 
-- 
1.7.2.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot