On Wed, Jan 18, 2023 at 04:11:15PM +0800, Yanhong Wang wrote: > This series of patches base on the latest branch/master, and add support > for the StarFive JH7110 RISC-V SoC and VisionFive V2 board. In order for > this to be achieved, the respective DT nodes have been added, and the > required defconfigs have been added to the boards' defconfig. What is more, > the basic required DM drivers have been added, such as reset, clock, pinctrl, > uart, ram etc. > > Note that the register base address of reset controller is same with the > clock controller. Therefore, there is no device tree node alone for reset > driver. It binds device node in the clock driver. > > The u-boot-spl and u-boot has been tested on the VisionFive V2 boards which > equip with JH7110 SoC and works normally. > > For more information and support, you can visit RVspace wiki[1]. > > [1] https://wiki.rvspace.org/ > > Changes in v2: > - Renamed file 'jh7110-regs.h' to 'regs.h'. > - Reworded the clear L2 LIM memory code in C. > - Removed flash init call in 'spl_soc_init' function. > - Reworded the clock driver. > - Rename the macro 'SET_DIV' to 'ASSIGNED_CLOCK_PARENTS' in 'spl.c'. > - Moved the device tree node 'dmc@15700000' from 'jh7110-u-boot.dtsi' to > 'starfive_visionfive2-u-boot.dtsi'. > > Previous versions: > v1 - > https://patchwork.ozlabs.org/project/uboot/cover/20221212025020.23778-1-yanhong.w...@starfivetech.com/ > > Jianlong Huang (1): > dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions > > Kuan Lim Lee (1): > pinctrl: starfive: Add StarFive JH7110 driver > > Yanhong Wang (15): > riscv: cpu: jh7110: Add support for jh7110 SoC > cache: starfive: Add StarFive JH7110 support > dt-bindings: reset: Add StarFive JH7110 reset definitions > reset: starfive: jh7110: Add reset driver for StarFive JH7110 SoC > dt-bindings: clock: Add StarFive JH7110 clock definitions > clk: starfive: Add StarFive JH7110 clock driver > ram: starfive: add ddr driver > board: starfive: add StarFive VisionFive v2 board support > riscv: cpu: jh7110: Add Kconfig for StarFive JH7110 SoC > board: starfive: Add Kconfig for StarFive VisionFive v2 Board > board: starfive: Add TARGET_STARFIVE_VISIONFIVE2 to Kconfig > riscv: dts: jh7110: Add initial StarFive JH7110 device tree > riscv: dts: jh7110: Add initial u-boot device tree > riscv: dts: jh7110: Add initial StarFive VisionFive v2 board device > tree > configs: starfive: add starfive_visionfive2_defconfig
Apologies if I have missed it somewhere - but where is patch 12? I don't see it on lore.kernel.org nor in my inbox :( Thanks, Conor.
signature.asc
Description: PGP signature
