[PATCH] net: zynq_gem: Add a 10ms delay in zynq_gem_init()

[Stefan Roese]

In our system using ZynqMP with an external SGMII PHY it's necessary
to wait a short while after the configuration in zynq_gem_init() before
the xfer starts. Otherwise the first packet(s) might get dropped,
resulting in a delay at the start of the ethernet transfers.

This patch adds a minimal delay of 10ms which fixes problems of dropped
first packages.

Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Michal Simek <michal.si...@amd.com>
Cc: Ramon Fried <rfried....@gmail.com>
Cc: Sean Anderson <sean.ander...@seco.com>
---
 drivers/net/zynq_gem.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 507b19b75975..26e468766871 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -522,6 +522,13 @@ static int zynq_gem_init(struct udevice *dev)
                        return ret;
                }
        }
+
+       /*
+        * Some additional minimal delay seems to be needed so that
+        * the first packet will be sent correctly
+        */
+       mdelay(10);
+
        setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
                                        ZYNQ_GEM_NWCTRL_TXEN_MASK);
 
-- 
2.39.0