On 1/5/23 16:34, Chris Morgan wrote:
> From: Chris Morgan <macromor...@hotmail.com>
>
> Sync rk3566 and rk3568 from the mainline Linux kernel (6.2-rc2 as of
> this writing).
>
> Note that this will rename the rk3568-evb to rk3568-evb1-v10.
>
> Signed-off-by: Chris Morgan <macromor...@hotmail.com>
> ---
> arch/arm/dts/Makefile | 2 +-
> arch/arm/dts/rk3568-evb.dts | 79 ----
> arch/arm/dts/rk3568-evb1-v10.dts | 692 +++++++++++++++++++++++++++++++
> arch/arm/dts/rk3568.dtsi | 122 ++++++
> arch/arm/dts/rk356x.dtsi | 182 +++++++-
> configs/evb-rk3568_defconfig | 4 +-
> 6 files changed, 985 insertions(+), 96 deletions(-)
> delete mode 100644 arch/arm/dts/rk3568-evb.dts
> create mode 100644 arch/arm/dts/rk3568-evb1-v10.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 43951a7731..e1d8866bbf 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -164,7 +164,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
> rk3399pro-rock-pi-n10.dtb
>
> dtb-$(CONFIG_ROCKCHIP_RK3568) += \
> - rk3568-evb.dtb
> + rk3568-evb1-v10.dtb
>
> dtb-$(CONFIG_ROCKCHIP_RV1108) += \
> rv1108-elgin-r1.dtb \
> diff --git a/arch/arm/dts/rk3568-evb.dts b/arch/arm/dts/rk3568-evb.dts
> deleted file mode 100644
> index 6978655709..0000000000
> --- a/arch/arm/dts/rk3568-evb.dts
> +++ /dev/null
> @@ -1,79 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> - *
> - */
> -
> -/dts-v1/;
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include "rk3568.dtsi"
> -
> -/ {
> - model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
> - compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";
> -
> - chosen: chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - dc_12v: dc-12v {
> - compatible = "regulator-fixed";
> - regulator-name = "dc_12v";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - vcc3v3_sys: vcc3v3-sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&dc_12v>;
> - };
> -
> - vcc3v3_lcd0_n: vcc3v3-lcd0-n {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_lcd0_n";
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcc3v3_lcd1_n: vcc3v3-lcd1-n {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc3v3_lcd1_n";
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -};
> -
> -&sdhci {
> - bus-width = <8>;
> - max-frequency = <200000000>;
> - non-removable;
> - status = "okay";
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> diff --git a/arch/arm/dts/rk3568-evb1-v10.dts
> b/arch/arm/dts/rk3568-evb1-v10.dts
Hi Chris,
Is it possible to add this file and rk3568-evb-u-boot.dtsi to:
/board/rockchip/evb_rk3568/MAINTAINERS
Fix order with (From Linux):
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Also add to:
/doc/board/rockchip/rockchip.rst
Add to the list of mainline supported Rockchip boards.
Make a "To build rk3568 boards:"
Johan
> new file mode 100644
> index 0000000000..674792567f
> --- /dev/null
> +++ b/arch/arm/dts/rk3568-evb1-v10.dts
> @@ -0,0 +1,692 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +#include "rk3568.dtsi"
> +
> +/ {
> + model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
> + compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";
> +
> + aliases {
> + ethernet0 = &gmac0;
> + ethernet1 = &gmac1;
> + mmc0 = &sdmmc0;
> + mmc1 = &sdhci;
> + };
> +
> + chosen: chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + dc_12v: dc-12v {
> + compatible = "regulator-fixed";
> + regulator-name = "dc_12v";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + hdmi-con {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led_work: led-0 {
> + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
> + function = LED_FUNCTION_HEARTBEAT;
> + color = <LED_COLOR_ID_BLUE>;
> + linux,default-trigger = "heartbeat";
> + pinctrl-names = "default";
> + pinctrl-0 = <&led_work_en>;
> + };
> + };
> +
> + rk809-sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,name = "Analog RK809";
> + simple-audio-card,mclk-fs = <256>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s1_8ch>;
> + };
> + simple-audio-card,codec {
> + sound-dai = <&rk809>;
> + };
> + };
> +
> + vcc3v3_sys: vcc3v3-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&dc_12v>;
> + };
> +
> + vcc5v0_sys: vcc5v0-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&dc_12v>;
> + };
> +
> + vcc5v0_usb: vcc5v0-usb {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&dc_12v>;
> + };
> +
> + vcc5v0_usb_host: vcc5v0-usb-host {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_usb_host_en>;
> + regulator-name = "vcc5v0_usb_host";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc5v0_usb>;
> + };
> +
> + vcc5v0_usb_otg: vcc5v0-usb-otg {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_usb_otg_en>;
> + regulator-name = "vcc5v0_usb_otg";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc5v0_usb>;
> + };
> +
> + vcc3v3_lcd0_n: vcc3v3-lcd0-n {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_lcd0_n";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&vcc3v3_sys>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc3v3_lcd0_n_en>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_lcd1_n: vcc3v3-lcd1-n {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_lcd1_n";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&vcc3v3_sys>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc3v3_lcd1_n_en>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&combphy0 {
> + status = "okay";
> +};
> +
> +&combphy1 {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu1 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu2 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu3 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&gmac0 {
> + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
> + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
> + assigned-clock-rates = <0>, <125000000>;
> + clock_in_out = "output";
> + phy-handle = <&rgmii_phy0>;
> + phy-mode = "rgmii-id";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gmac0_miim
> + &gmac0_tx_bus2
> + &gmac0_rx_bus2
> + &gmac0_rgmii_clk
> + &gmac0_rgmii_bus>;
> + status = "okay";
> +};
> +
> +&gmac1 {
> + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
> + assigned-clock-rates = <0>, <125000000>;
> + clock_in_out = "output";
> + phy-handle = <&rgmii_phy1>;
> + phy-mode = "rgmii-id";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gmac1m1_miim
> + &gmac1m1_tx_bus2
> + &gmac1m1_rx_bus2
> + &gmac1m1_rgmii_clk
> + &gmac1m1_rgmii_bus>;
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + avdd-0v9-supply = <&vdda0v9_image>;
> + avdd-1v8-supply = <&vcca1v8_image>;
> + status = "okay";
> +};
> +
> +&hdmi_in {
> + hdmi_in_vp0: endpoint {
> + remote-endpoint = <&vp0_out_hdmi>;
> + };
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&hdmi_sound {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + vdd_cpu: regulator@1c {
> + compatible = "tcs,tcs4525";
> + reg = <0x1c>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1150000>;
> + regulator-ramp-delay = <2300>;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + rk809: pmic@20 {
> + compatible = "rockchip,rk809";
> + reg = <0x20>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> + assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> + #clock-cells = <1>;
> + clock-names = "mclk";
> + clocks = <&cru I2S1_MCLKOUT_TX>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
> + rockchip,system-power-controller;
> + #sound-dai-cells = <0>;
> + vcc1-supply = <&vcc3v3_sys>;
> + vcc2-supply = <&vcc3v3_sys>;
> + vcc3-supply = <&vcc3v3_sys>;
> + vcc4-supply = <&vcc3v3_sys>;
> + vcc5-supply = <&vcc3v3_sys>;
> + vcc6-supply = <&vcc3v3_sys>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc3v3_sys>;
> + wakeup-source;
> +
> + regulators {
> + vdd_logic: DCDC_REG1 {
> + regulator-name = "vdd_logic";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-init-microvolt = <900000>;
> + regulator-initial-mode = <0x2>;
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: DCDC_REG2 {
> + regulator-name = "vdd_gpu";
> + regulator-always-on;
> + regulator-init-microvolt = <900000>;
> + regulator-initial-mode = <0x2>;
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-mode = <0x2>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vdd_npu: DCDC_REG4 {
> + regulator-name = "vdd_npu";
> + regulator-init-microvolt = <900000>;
> + regulator-initial-mode = <0x2>;
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8: DCDC_REG5 {
> + regulator-name = "vcc_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdda0v9_image: LDO_REG1 {
> + regulator-name = "vdda0v9_image";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdda_0v9: LDO_REG2 {
> + regulator-name = "vdda_0v9";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdda0v9_pmu: LDO_REG3 {
> + regulator-name = "vdda0v9_pmu";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vccio_acodec: LDO_REG4 {
> + regulator-name = "vccio_acodec";
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-name = "vccio_sd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_pmu: LDO_REG6 {
> + regulator-name = "vcc3v3_pmu";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcca_1v8: LDO_REG7 {
> + regulator-name = "vcca_1v8";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcca1v8_pmu: LDO_REG8 {
> + regulator-name = "vcca1v8_pmu";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcca1v8_image: LDO_REG9 {
> + regulator-name = "vcca1v8_image";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v3: SWITCH_REG1 {
> + regulator-name = "vcc_3v3";
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc3v3_sd: SWITCH_REG2 {
> + regulator-name = "vcc3v3_sd";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> +
> + codec {
> + mic-in-differential;
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + touchscreen0: goodix@14 {
> + compatible = "goodix,gt1151";
> + reg = <0x14>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
> + AVDD28-supply = <&vcc3v3_lcd0_n>;
> + irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&touch_int &touch_rst>;
> + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
> + VDDIO-supply = <&vcc3v3_lcd0_n>;
> + };
> +};
> +
> +&i2s0_8ch {
> + status = "okay";
> +};
> +
> +&i2s1_8ch {
> + rockchip,trcm-sync-tx-only;
> + status = "okay";
> +};
> +
> +&mdio0 {
> + rgmii_phy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0>;
> + reset-assert-us = <20000>;
> + reset-deassert-us = <100000>;
> + reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&mdio1 {
> + rgmii_phy1: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0>;
> + reset-assert-us = <20000>;
> + reset-deassert-us = <100000>;
> + reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&pinctrl {
> + display {
> + vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en {
> + rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>;
> + };
> + vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en {
> + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
> + };
> + };
> +
> + leds {
> + led_work_en: led_work_en {
> + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int: pmic_int {
> + rockchip,pins =
> + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + touchscreen {
> + touch_int: touch_int {
> + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + touch_rst: touch_rst {
> + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + usb {
> + vcc5v0_usb_host_en: vcc5v0_usb_host_en {
> + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + pmuio1-supply = <&vcc3v3_pmu>;
> + pmuio2-supply = <&vcc3v3_pmu>;
> + vccio1-supply = <&vccio_acodec>;
> + vccio2-supply = <&vcc_1v8>;
> + vccio3-supply = <&vccio_sd>;
> + vccio4-supply = <&vcc_1v8>;
> + vccio5-supply = <&vcc_3v3>;
> + vccio6-supply = <&vcc_1v8>;
> + vccio7-supply = <&vcc_3v3>;
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcca_1v8>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + max-frequency = <200000000>;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> + status = "okay";
> +};
> +
> +&sdmmc0 {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> + sd-uhs-sdr104;
> + vmmc-supply = <&vcc3v3_sd>;
> + vqmmc-supply = <&vccio_sd>;
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>;
> + rockchip,hw-tshut-polarity = <0>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host0_xhci {
> + extcon = <&usb2phy0>;
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_xhci {
> + status = "okay";
> +};
> +
> +&usb2phy0 {
> + status = "okay";
> +};
> +
> +&usb2phy0_host {
> + phy-supply = <&vcc5v0_usb_host>;
> + status = "okay";
> +};
> +
> +&usb2phy0_otg {
> + phy-supply = <&vcc5v0_usb_otg>;
> + status = "okay";
> +};
> +
> +&usb2phy1 {
> + status = "okay";
> +};
> +
> +&usb2phy1_host {
> + phy-supply = <&vcc5v0_usb_host>;
> + status = "okay";
> +};
> +
> +&usb2phy1_otg {
> + phy-supply = <&vcc5v0_usb_host>;
> + status = "okay";
> +};
> +
> +&vop {
> + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> + status = "okay";
> +};
> +
> +&vop_mmu {
> + status = "okay";
> +};
> +
> +&vp0 {
> + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> + reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> + remote-endpoint = <&hdmi_in_vp0>;
> + };
> +};
> diff --git a/arch/arm/dts/rk3568.dtsi b/arch/arm/dts/rk3568.dtsi
> index 2bdf8c7e97..ba67b58f05 100644
> --- a/arch/arm/dts/rk3568.dtsi
> +++ b/arch/arm/dts/rk3568.dtsi
> @@ -42,6 +42,128 @@
> reg = <0x0 0xfe190200 0x0 0x20>;
> };
>
> + pcie30_phy_grf: syscon@fdcb8000 {
> + compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
> + reg = <0x0 0xfdcb8000 0x0 0x10000>;
> + };
> +
> + pcie30phy: phy@fe8c0000 {
> + compatible = "rockchip,rk3568-pcie3-phy";
> + reg = <0x0 0xfe8c0000 0x0 0x20000>;
> + #phy-cells = <0>;
> + clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru
> CLK_PCIE30PHY_REF_N>,
> + <&cru PCLK_PCIE30PHY>;
> + clock-names = "refclk_m", "refclk_n", "pclk";
> + resets = <&cru SRST_PCIE30PHY>;
> + reset-names = "phy";
> + rockchip,phy-grf = <&pcie30_phy_grf>;
> + status = "disabled";
> + };
> +
> + pcie3x1: pcie@fe270000 {
> + compatible = "rockchip,rk3568-pcie";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + bus-range = <0x0 0xf>;
> + clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
> + <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
> + <&cru CLK_PCIE30X1_AUX_NDFT>;
> + clock-names = "aclk_mst", "aclk_slv",
> + "aclk_dbi", "pclk", "aux";
> + device_type = "pci";
> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "sys", "pmc", "msg", "legacy", "err";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
> + <0 0 0 2 &pcie3x1_intc 1>,
> + <0 0 0 3 &pcie3x1_intc 2>,
> + <0 0 0 4 &pcie3x1_intc 3>;
> + linux,pci-domain = <1>;
> + num-ib-windows = <6>;
> + num-ob-windows = <2>;
> + max-link-speed = <3>;
> + msi-map = <0x0 &gic 0x1000 0x1000>;
> + num-lanes = <1>;
> + phys = <&pcie30phy>;
> + phy-names = "pcie-phy";
> + power-domains = <&power RK3568_PD_PIPE>;
> + reg = <0x3 0xc0400000 0x0 0x00400000>,
> + <0x0 0xfe270000 0x0 0x00010000>,
> + <0x3 0x7f000000 0x0 0x01000000>;
> + ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0
> 0x00100000>,
> + <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0
> 0x3ef00000>;
> + reg-names = "dbi", "apb", "config";
> + resets = <&cru SRST_PCIE30X1_POWERUP>;
> + reset-names = "pipe";
> + /* bifurcation; lane1 when using 1+1 */
> + status = "disabled";
> +
> + pcie3x1_intc: legacy-interrupt-controller {
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
> + };
> + };
> +
> + pcie3x2: pcie@fe280000 {
> + compatible = "rockchip,rk3568-pcie";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + bus-range = <0x0 0xf>;
> + clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
> + <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
> + <&cru CLK_PCIE30X2_AUX_NDFT>;
> + clock-names = "aclk_mst", "aclk_slv",
> + "aclk_dbi", "pclk", "aux";
> + device_type = "pci";
> + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "sys", "pmc", "msg", "legacy", "err";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
> + <0 0 0 2 &pcie3x2_intc 1>,
> + <0 0 0 3 &pcie3x2_intc 2>,
> + <0 0 0 4 &pcie3x2_intc 3>;
> + linux,pci-domain = <2>;
> + num-ib-windows = <6>;
> + num-ob-windows = <2>;
> + max-link-speed = <3>;
> + msi-map = <0x0 &gic 0x2000 0x1000>;
> + num-lanes = <2>;
> + phys = <&pcie30phy>;
> + phy-names = "pcie-phy";
> + power-domains = <&power RK3568_PD_PIPE>;
> + reg = <0x3 0xc0800000 0x0 0x00400000>,
> + <0x0 0xfe280000 0x0 0x00010000>,
> + <0x3 0xbf000000 0x0 0x01000000>;
> + ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0
> 0x00100000>,
> + <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0
> 0x3ef00000>;
> + reg-names = "dbi", "apb", "config";
> + resets = <&cru SRST_PCIE30X2_POWERUP>;
> + reset-names = "pipe";
> + /* bifurcation; lane0 when using 1+1 */
> + status = "disabled";
> +
> + pcie3x2_intc: legacy-interrupt-controller {
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
> + };
> + };
> +
> gmac0: ethernet@fe2a0000 {
> compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
> reg = <0x0 0xfe2a0000 0x0 0x10000>;
> diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi
> index 319981c3e9..5706c3e24f 100644
> --- a/arch/arm/dts/rk356x.dtsi
> +++ b/arch/arm/dts/rk356x.dtsi
> @@ -592,6 +592,46 @@
> status = "disabled";
> };
>
> + vpu: video-codec@fdea0400 {
> + compatible = "rockchip,rk3568-vpu";
> + reg = <0x0 0xfdea0000 0x0 0x800>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
> + clock-names = "aclk", "hclk";
> + iommus = <&vdpu_mmu>;
> + power-domains = <&power RK3568_PD_VPU>;
> + };
> +
> + vdpu_mmu: iommu@fdea0800 {
> + compatible = "rockchip,rk3568-iommu";
> + reg = <0x0 0xfdea0800 0x0 0x40>;
> + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "aclk", "iface";
> + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
> + power-domains = <&power RK3568_PD_VPU>;
> + #iommu-cells = <0>;
> + };
> +
> + vepu: video-codec@fdee0000 {
> + compatible = "rockchip,rk3568-vepu";
> + reg = <0x0 0xfdee0000 0x0 0x800>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
> + clock-names = "aclk", "hclk";
> + iommus = <&vepu_mmu>;
> + power-domains = <&power RK3568_PD_RGA>;
> + };
> +
> + vepu_mmu: iommu@fdee0800 {
> + compatible = "rockchip,rk3568-iommu";
> + reg = <0x0 0xfdee0800 0x0 0x40>;
> + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
> + clock-names = "aclk", "iface";
> + power-domains = <&power RK3568_PD_RGA>;
> + #iommu-cells = <0>;
> + };
> +
> sdmmc2: mmc@fe000000 {
> compatible = "rockchip,rk3568-dw-mshc",
> "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xfe000000 0x0 0x4000>;
> @@ -699,6 +739,62 @@
> status = "disabled";
> };
>
> + dsi0: dsi@fe060000 {
> + compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
> + reg = <0x00 0xfe060000 0x00 0x10000>;
> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "pclk", "hclk";
> + clocks = <&cru PCLK_DSITX_0>, <&cru HCLK_VO>;
> + phy-names = "dphy";
> + phys = <&dsi_dphy0>;
> + power-domains = <&power RK3568_PD_VO>;
> + reset-names = "apb";
> + resets = <&cru SRST_P_DSITX_0>;
> + rockchip,grf = <&grf>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dsi0_in: port@0 {
> + reg = <0>;
> + };
> +
> + dsi0_out: port@1 {
> + reg = <1>;
> + };
> + };
> + };
> +
> + dsi1: dsi@fe070000 {
> + compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
> + reg = <0x0 0xfe070000 0x0 0x10000>;
> + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "pclk", "hclk";
> + clocks = <&cru PCLK_DSITX_1>, <&cru HCLK_VO>;
> + phy-names = "dphy";
> + phys = <&dsi_dphy1>;
> + power-domains = <&power RK3568_PD_VO>;
> + reset-names = "apb";
> + resets = <&cru SRST_P_DSITX_1>;
> + rockchip,grf = <&grf>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dsi1_in: port@0 {
> + reg = <0>;
> + };
> +
> + dsi1_out: port@1 {
> + reg = <1>;
> + };
> + };
> + };
> +
> hdmi: hdmi@fe0a0000 {
> compatible = "rockchip,rk3568-dw-hdmi";
> reg = <0x0 0xfe0a0000 0x0 0x20000>;
> @@ -953,20 +1049,6 @@
> status = "disabled";
> };
>
> - spdif: spdif@fe460000 {
> - compatible = "rockchip,rk3568-spdif";
> - reg = <0x0 0xfe460000 0x0 0x1000>;
> - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "mclk", "hclk";
> - clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
> - dmas = <&dmac1 1>;
> - dma-names = "tx";
> - pinctrl-names = "default";
> - pinctrl-0 = <&spdifm0_tx>;
> - #sound-dai-cells = <0>;
> - status = "disabled";
> - };
> -
> i2s0_8ch: i2s@fe400000 {
> compatible = "rockchip,rk3568-i2s-tdm";
> reg = <0x0 0xfe400000 0x0 0x1000>;
> @@ -1009,6 +1091,28 @@
> status = "disabled";
> };
>
> + i2s2_2ch: i2s@fe420000 {
> + compatible = "rockchip,rk3568-i2s-tdm";
> + reg = <0x0 0xfe420000 0x0 0x1000>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> + assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
> + assigned-clock-rates = <1188000000>;
> + clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru
> HCLK_I2S2_2CH>;
> + clock-names = "mclk_tx", "mclk_rx", "hclk";
> + dmas = <&dmac1 4>, <&dmac1 5>;
> + dma-names = "tx", "rx";
> + resets = <&cru SRST_M_I2S2_2CH>;
> + reset-names = "m";
> + rockchip,grf = <&grf>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s2m0_sclktx
> + &i2s2m0_lrcktx
> + &i2s2m0_sdi
> + &i2s2m0_sdo>;
> + #sound-dai-cells = <0>;
> + status = "disabled";
> + };
> +
> i2s3_2ch: i2s@fe430000 {
> compatible = "rockchip,rk3568-i2s-tdm";
> reg = <0x0 0xfe430000 0x0 0x1000>;
> @@ -1046,6 +1150,20 @@
> status = "disabled";
> };
>
> + spdif: spdif@fe460000 {
> + compatible = "rockchip,rk3568-spdif";
> + reg = <0x0 0xfe460000 0x0 0x1000>;
> + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "mclk", "hclk";
> + clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
> + dmas = <&dmac1 1>;
> + dma-names = "tx";
> + pinctrl-names = "default";
> + pinctrl-0 = <&spdifm0_tx>;
> + #sound-dai-cells = <0>;
> + status = "disabled";
> + };
> +
> dmac0: dma-controller@fe530000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x0 0xfe530000 0x0 0x4000>;
> @@ -1594,6 +1712,42 @@
> status = "disabled";
> };
>
> + csi_dphy: phy@fe870000 {
> + compatible = "rockchip,rk3568-csi-dphy";
> + reg = <0x0 0xfe870000 0x0 0x10000>;
> + clocks = <&cru PCLK_MIPICSIPHY>;
> + clock-names = "pclk";
> + #phy-cells = <0>;
> + resets = <&cru SRST_P_MIPICSIPHY>;
> + reset-names = "apb";
> + rockchip,grf = <&grf>;
> + status = "disabled";
> + };
> +
> + dsi_dphy0: mipi-dphy@fe850000 {
> + compatible = "rockchip,rk3568-dsi-dphy";
> + reg = <0x0 0xfe850000 0x0 0x10000>;
> + clock-names = "ref", "pclk";
> + clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>;
> + #phy-cells = <0>;
> + power-domains = <&power RK3568_PD_VO>;
> + reset-names = "apb";
> + resets = <&cru SRST_P_MIPIDSIPHY0>;
> + status = "disabled";
> + };
> +
> + dsi_dphy1: mipi-dphy@fe860000 {
> + compatible = "rockchip,rk3568-dsi-dphy";
> + reg = <0x0 0xfe860000 0x0 0x10000>;
> + clock-names = "ref", "pclk";
> + clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>;
> + #phy-cells = <0>;
> + power-domains = <&power RK3568_PD_VO>;
> + reset-names = "apb";
> + resets = <&cru SRST_P_MIPIDSIPHY1>;
> + status = "disabled";
> + };
> +
> usb2phy0: usb2phy@fe8a0000 {
> compatible = "rockchip,rk3568-usb2phy";
> reg = <0x0 0xfe8a0000 0x0 0x10000>;
> diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig
> index db3acf5be5..2e9891bb1b 100644
> --- a/configs/evb-rk3568_defconfig
> +++ b/configs/evb-rk3568_defconfig
> @@ -6,7 +6,7 @@ CONFIG_TEXT_BASE=0x00a00000
> CONFIG_SPL_LIBCOMMON_SUPPORT=y
> CONFIG_SPL_LIBGENERIC_SUPPORT=y
> CONFIG_NR_DRAM_BANKS=2
> -CONFIG_DEFAULT_DEVICE_TREE="rk3568-evb"
> +CONFIG_DEFAULT_DEVICE_TREE="rk3568-evb1-v10"
> CONFIG_ROCKCHIP_RK3568=y
> CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
> CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
> @@ -23,7 +23,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
> CONFIG_FIT=y
> CONFIG_FIT_VERBOSE=y
> CONFIG_SPL_LOAD_FIT=y
> -CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb1-v10.dtb"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_MAX_SIZE=0x20000
