Dear Timur Tabi, In message <1295304993-19369-1-git-send-email-ti...@freescale.com> you wrote: > The ngPIXIS is an FPGA used on the reference boards of most Freescale PowerPC > SOCs. Although programming the ngPIXIS is mostly standard on all boards that > have it, the P1022DS is unique in that the ngPIXIS needs to be programmed in > "indirect" mode whenever the video display (DIU) is active. > > To support indirect mode, and to make it easier to support other quirks on > future reference boards, the low-level ngPIXIS functions are all marked as > weak, so that board-specific code can override any of them. We take advantage > of this feature on the P1022DS, so that we can properly reset the board when > the DIU is active. > > Signed-off-by: Timur Tabi <ti...@freescale.com> > --- > board/freescale/common/ngpixis.c | 54 ++++++++++++++++++++++++-------- > board/freescale/common/ngpixis.h | 6 +++ > board/freescale/p1022ds/diu.c | 64 ++++++++++++++++++++++++++++++++++++- > 3 files changed, 109 insertions(+), 15 deletions(-)
Just for the record: the merge window is closed, so this is "next" stuff. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de How much net work could a network work, if a network could net work? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot