Dear Alex Dubov,
In message <369392.26813...@web37607.mail.mud.yahoo.com> you wrote:
> >
> > Could you please be a bit more specific, i. e. like quoting
> > file names
> > and line numbers?
> >
>
> These were produced by
> grep -nr ddr\-\> board/ | grep -v out_be
>
> I can attach a listing, but it should be quicker this way.
> Up until now it seemed a rather common practice to initialize ddr
> controllers directly, bypassing io accessors.
Indeed. Even after the recent removal of some boards this list
remains:
board/freescale/mpc8349itx/mpc8349itx.c
board/freescale/mpc8536ds/mpc8536ds.c
board/freescale/mpc8540ads/mpc8540ads.c
board/freescale/mpc8560ads/mpc8560ads.c
board/freescale/mpc8569mds/mpc8569mds.c
board/freescale/mpc8572ds/mpc8572ds.c
board/freescale/mpc8610hpcd/mpc8610hpcd.c
board/freescale/mpc8641hpcn/mpc8641hpcn.c
board/freescale/p2020ds/p2020ds.c
board/sbc8560/sbc8560.c
board/sbc8641d/sbc8641d.c
board/socrates/sdram.c
board/tqc/tqm85xx/sdram.c
Kumar, Andy - do you have any plans to fix this for the freescale
boards?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
I've got a bad feeling about this.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
