Hi All this is what I do:
1) I run u-Boot getting this output:
U-Boot 2010.12-09860-g9cb5761-dirty (Jan 17 2011 - 18:05:12)
CPU: SH2A
BOARD: MLCD7203
DRAM: 64MB
*** Warning - bad CRC, using default environment
Destroy Hash Table: 0c7d6df8 table = (null)
Create Hash Table: N=72
INSERT: table 0c7d6df8, filled 1/73 rv 0c780144 ==> name="bootargs"
value="console=ttySC0,115200"
INSERT: table 0c7d6df8, filled 2/73 rv 0c780324 ==> name="baudrate"
value="115200"
INSERT: table 0c7d6df8, filled 3/73 rv 0c7800cc ==> name="loadaddr"
value="0x0C200000"
INSERT: free(data = 0c77ffb8)
INSERT: done
fwc addr 20000000 cmd f0 00f0 16bit x 16 bit
fwc addr 2000aaaa cmd aa 00aa 16bit x 16 bit
fwc addr 20005554 cmd 55 0055 16bit x 16 bit
fwc addr 2000aaaa cmd 90 0090 16bit x 16 bit
fwc addr 20000000 cmd f0 00f0 16bit x 16 bit
JEDEC PROBE: ID bf 236c 0
Found JEDEC Flash: SST 39VF6402B
unlock address index 1
unlock addresses are 0x555/0x2aa
erase_region_count = 128 erase_region_size = 65536
flash_protect ON: from 0x20000000 to 0x2001FFFF
protect on 0
protect on 1
flash_protect ON: from 0x20020000 to 0x2002FFFF
protect on 2
FLASH: 8MB
In: serial
Out: serial
Err: serial
=>
2) I load my uImage getting this output from iminfo:
=> loady
## Ready for binary (ymodem) download to 0x0C200000 at 115200 bps...
Code, 7627(SOH)/0(STX)/0(CAN) packets, 4 retries
## Total Size = 0x000ee445 = 975941 Bytes
=> iminfo
## Checking Image at 0c200000 ...
Legacy image found
Image Name: Linux-2.6.37+
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 975877 Bytes = 953 KiB
Load Address: 0c001000
Entry Point: 0c002000
Verifying Checksum ... OK
=>
Any ideas about why the kernelò do not send out anything?
--
Ing. Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Fax. +39.051.082.14.49
Cell. +39.335.83.50.919
www.aurion-tech.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
