On 01/17/2011 05:43 PM, Jason Liu wrote: > Hi, Stefano, Hi Jason,
> > You want to remove this file, is there this file in the mainline? Of course, it was a mistake. I drop it. >> diff --git a/board/freescale/mx35pdk/config.mk >> b/board/freescale/mx35pdk/config.mk >> new file mode 100644 >> index 0000000..3db1c85 >> --- /dev/null >> +++ b/board/freescale/mx35pdk/config.mk >> @@ -0,0 +1,25 @@ >> +# >> +# (C) Copyright 2010 >> +# Stefano Babic DENX Software Engineering sba...@denx.de. >> +# >> +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. >> +# >> +# See file CREDITS for list of people who contributed to this >> +# project. >> +# >> +# This program is free software; you can redistribute it and/or >> +# modify it under the terms of the GNU General Public License as >> +# published by the Free Software Foundation; either version 2 of >> +# the License, or (at your option) any later version. >> +# >> +# This program is distributed in the hope that it will be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program; if not, write to the Free Software >> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, >> +# MA 02111-1307 USA >> +# >> +CONFIG_SYS_TEXT_BASE = 0xA0000000 > > Need move this config to board config file and remove this file. I have not understood this point. The link address CONFIG_SYS_TEXT_BASE is always set in the config.mk file, because it is needed by the linker process, and it is not set in the configuration file (I think you mean mx35pdk.h). All boards follow this rule. If I move it, the linker does not find it. Do you mean probably something else ? Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
