From: Quentin Schulz <quentin.sch...@theobroma-systems.com> The PX30-uQ7 (Ringneck) SoM is a µQseven-compatible (40mmx70mm, MXM-230 connector) system-on-module from Theobroma Systems[1], featuring the Rockchip PX30.
It provides the following feature set: * up to 4GB DDR4 * up to 128GB on-module eMMC (with 8-bit 1.8V interface) * SD card (on a baseboard) via edge connector * Fast Ethernet with on-module TI DP83825I PHY * MIPI-DSI/LVDS * MIPI-CSI * USB - 1x USB 2.0 dual-role - 3x USB 2.0 host * on-module companion controller (STM32 Cortex-M0 or ATtiny), implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller (STM32 only) * on-module Espressif ESP32 for Bluetooth + 2.4GHz WiFi * on-module NXP SE05x Secure Element [1] https://www.theobroma-systems.com/som-product/px30-uq7/ Cheers, Quentin To: Heiko Stuebner <he...@sntech.de> To: Simon Glass <s...@chromium.org> To: Philipp Tomsich <philipp.toms...@vrull.eu> To: Klaus Goger <klaus.go...@theobroma-systems.com> Cc: Quentin Schulz <foss+ub...@0leil.net> Cc: u-boot@lists.denx.de Cc: Kever Yang <kever.y...@rock-chips.com> Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com> --- Changes in v5: - added fix for unused variables in px30.c, - fixed missing fdt_support.h inclusion in px30.c, - updated commit log to reference v6.1 and v6.2-rc2 sources for syncing of files instead of linux-next, - rebased on top of master, - Link to v4: https://lore.kernel.org/r/20221017-upstream-ringneck-v4-0-5e0a3f119...@theobroma-systems.com Changes in v4: - added CONFIG_ENV_OVERWRITE to defconfig to match Puma behavior and allow commands specified in our user manual, - added comment in commit log for the DTS origin (next-20221114), - Link to v3: https://lore.kernel.org/r/20221017-upstream-ringneck-v3-0-d6ae387f3...@theobroma-systems.com Changes in v3: - added Rb, - rebased on top of master, - fixed http links to use u instead of encoded µ, - updated u-boot,mmc-env-offset from 16KB to 20KB to avoid GPT corruption when saving env + reduced env size to 0x3000 to adapt to the offset change, - removed video support from defconfig as there's no display support ATM, - Link to v2: https://lore.kernel.org/r/20221017-upstream-ringneck-v2-0-0f03912eb...@theobroma-systems.com Changes in v2: - updated DTS from Linux with v2 of the Linux kernel patch series, - updated node nade for bios-disable-override-hog to match v2 of Linux kernel, - removed uapi input patch since it is not needed anymore, --- Quentin Schulz (6): rockchip: px30: fix possibly unused grf and cru variables rockchip: px30: fix CONFIG_IRAM_BASE rockchip: px30: list possible SPL boot devices rockchip: px30: insert u-boot,spl-boot-device into U-Boot device tree arm64: dts: rockchip: sync px30 DTSI with Linux kernel v6.1 rockchip: add support for PX30 Ringneck SoM on Haikou Devkit arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi | 91 +++++ arch/arm/dts/px30-ringneck-haikou.dts | 232 +++++++++++++ arch/arm/dts/px30-ringneck.dtsi | 382 +++++++++++++++++++++ arch/arm/dts/px30.dtsi | 28 +- arch/arm/mach-rockchip/px30/Kconfig | 25 ++ arch/arm/mach-rockchip/px30/px30.c | 67 ++++ board/theobroma-systems/ringneck_px30/Kconfig | 18 + board/theobroma-systems/ringneck_px30/MAINTAINERS | 9 + board/theobroma-systems/ringneck_px30/Makefile | 7 + board/theobroma-systems/ringneck_px30/README | 69 ++++ .../ringneck_px30/ringneck-px30.c | 175 ++++++++++ configs/ringneck-px30_defconfig | 128 +++++++ doc/board/rockchip/rockchip.rst | 1 + include/configs/px30_common.h | 3 +- include/configs/ringneck_px30.h | 15 + 15 files changed, 1245 insertions(+), 5 deletions(-) --- base-commit: 582e3c9fb2337c2f49faa73ac86dde25f4d56901 change-id: 20221017-upstream-ringneck-57abd09a7aaa Best regards, -- Quentin Schulz <quentin.sch...@theobroma-systems.com>
