When fit image boots from ram, the payload will
be prepared in the address of SPL_LOAD_FIT_ADDRESS.
In spl fit generic flow, it will malloc another
memory address and copy whole fit image to this
malloc address. But it is un-necessary for booting
from RAM.
This patch improves this flow by declare the
board_spl_fit_buffer_addr() to replace the original one.
The larger image size (eq: Kernel Image 10~20MB), it
can save more booting time.
Also enhance memcpy function by checking source and
destination address. If they are the same address,
just return and don't copy data anymore.
Signed-off-by: Rick Chen <r...@andestech.com>
---
arch/riscv/lib/memcpy.S | 2 ++
arch/riscv/lib/spl.c | 16 ++++++++++++++++
2 files changed, 18 insertions(+)
diff --git a/arch/riscv/lib/memcpy.S b/arch/riscv/lib/memcpy.S
index 00672c19ad..9884077c93 100644
--- a/arch/riscv/lib/memcpy.S
+++ b/arch/riscv/lib/memcpy.S
@@ -9,6 +9,7 @@
/* void *memcpy(void *, const void *, size_t) */
ENTRY(__memcpy)
WEAK(memcpy)
+ beq a0, a1, .copy_end
/* Save for return value */
mv t6, a0
@@ -121,6 +122,7 @@ WEAK(memcpy)
2:
mv a0, t6
+.copy_end:
ret
.Lmisaligned_word_copy:
diff --git a/arch/riscv/lib/spl.c b/arch/riscv/lib/spl.c
index f4d3b67e5d..18f86ee207 100644
--- a/arch/riscv/lib/spl.c
+++ b/arch/riscv/lib/spl.c
@@ -61,3 +61,19 @@ void __noreturn jump_to_image_no_args(struct spl_image_info
*spl_image)
#endif
image_entry(gd->arch.boot_hart, fdt_blob);
}
+
+#ifdef CONFIG_SPL_RAM_SUPPORT
+struct legacy_img_hdr *spl_get_load_buffer(ssize_t offset, size_t size)
+{
+ return (void *)(CONFIG_SPL_LOAD_FIT_ADDRESS + offset);
+}
+
+void *board_spl_fit_buffer_addr(ulong fit_size, int sectors, int bl_len)
+{
+ void *buf;
+
+ buf = spl_get_load_buffer(0, sectors * bl_len);
+
+ return buf;
+}
+#endif
--
2.17.1
