On Wed, Dec 21, 2022 at 10:29 AM Rick Chen <r...@andestech.com> wrote: > > Change openSBI load address from 0x1000000 to 0x0 and it
nits: OpenSBI > will start to run at 0x0 directly without relocation. > > Signed-off-by: Rick Chen <r...@andestech.com> > --- > board/AndesTech/ax25-ae350/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/AndesTech/ax25-ae350/Kconfig > b/board/AndesTech/ax25-ae350/Kconfig > index 36b67f0b52..4bb33b0793 100644 > --- a/board/AndesTech/ax25-ae350/Kconfig > +++ b/board/AndesTech/ax25-ae350/Kconfig > @@ -25,7 +25,7 @@ config SPL_TEXT_BASE > default 0x800000 > > config SPL_OPENSBI_LOAD_ADDR > - default 0x01000000 > + default 0x00000000 > > config SYS_FDT_BASE > hex > -- Can you describe why is this change a must have, like why 0x01000000 does not work? Is the reason the same as commit cb052d771200b15717eeb68f185cf7caa2dcfea0 "riscv: qemu: spl: Fix booting Linux kernel with OpenSBI 1.0+" Regards, Bin
