On Fri, 14 Jan 2011 09:44:44 +0800 张扬 <w90p...@gmail.com> wrote: > Dear Scott Wood > > 2011/1/13 Scott Wood <scottw...@freescale.com>: > > On Wed, 12 Jan 2011 09:00:52 +0100 > > Wolfgang Denk <w...@denx.de> wrote: > > > >> Dear =?UTF-8?B?5byg5oms?=, > >> > >> In message <AANLkTinUx-NmpundBm=scYeahCkBAd9=dx8b3ro7g...@mail.gmail.com> > >> you wrote: > >> > > >> > > i trying to sue the kernel's Makefile rule, but the issue is not > >> > > solved. > >> > WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND. > >> > ERROR: /chosen node create failed - must RESET the board to recover. > >> > >> Well, seems your device tree has some problem. > > > > My guess is it's an old U-Boot that can't create properties > > in /chosen if /chosen doesn't already exist. > > i use lastest version of u-boot, booting process gives the error. but i > > use u-boot-1.3.0 that's ok.
OK, check whether you have a "serial0" alias (or "serial1" if using what U-Boot thinks of as the second serial port, etc) in your device tree. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
