Add the pinctrl subnodes required by the USB related DT nodes.
Signed-off-by: Sergiu Moga <sergiu.m...@microchip.com>
---
v1 -> v4:
- No change
arch/arm/dts/at91-sama5d2_icp.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/dts/at91-sama5d2_icp.dts
b/arch/arm/dts/at91-sama5d2_icp.dts
index 2dffae9c5c..4f796c6c94 100644
--- a/arch/arm/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/dts/at91-sama5d2_icp.dts
@@ -154,7 +154,29 @@
<PIN_PA13__SDMMC0_CD>;
bias-disable;
};
+
+ pinctrl_usb_default: usb_default {
+ pinmux = <PIN_PC17__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ pinmux = <PIN_PD23__GPIO>;
+ bias-disable;
+ };
};
};
};
};
+
+&usb1 {
+ num-ports = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
+ status = "okay";
+};
+
+&usb2 {
+ phy_type = "hsic";
+ status = "okay";
+};
--
2.34.1
