On 12/13/22 03:02, Tom Rini wrote:
On Mon, Dec 12, 2022 at 01:53:05PM -0500, Tom Rini wrote:
On Mon, Dec 12, 2022 at 11:53:04AM -0500, Tom Rini wrote:
On Thu, Nov 10, 2022 at 03:34:53PM +0800, Macpaul Lin wrote:
From: Fabien Parent <fpar...@baylibre.com>
Add mt8195-demo board support.
This demo purpose board uses MediaTek's MT8195 SoC.
Signed-off-by: Fabien Parent <fpar...@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledam...@baylibre.com>
Signed-off-by: Macpaul Lin <macpaul....@mediatek.com>
[snip]
+#include <linux/sizes.h>
+
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_NS16550_COM1 0x11002000
+#define CONFIG_SYS_NS16550_CLK 26000000
This is unused, I believe. But when trying to build with current next I
get:
Error: Load Address must be set.
Error: Bad parameters for image type
Please rebase on top of current next and repost, thanks!
Thanks for the information, will send patch v4 later.
Sorry for the noise, this failed due to another patch that needs to be
reworked instead.
Welp, I should have finished my re-testing. The patch that broke
phycore-rk3288 and I assumed broke this platform too, did not break this
platform, there's still some other problem here.
I've tested it on uboot/next and got the following result.
$ make ARCH=arm phycore-rk3288_defconfig
$ make ARCH=arm
scripts/kconfig/conf --syncconfig Kconfig
UPD include/config.h
CFG u-boot.cfg
GEN include/autoconf.mk
GEN include/autoconf.mk.dep
CFG spl/u-boot.cfg
GEN spl/include/autoconf.mk
UPD include/config/uboot.release
UPD include/generated/version_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
UPD include/generated/dt.h
ENVC include/generated/env.txt
ENVP include/generated/env.in
ENVT include/generated/environment.h
CC lib/asm-offsets.s
cc1: error: bad value (‘generic-armv7-a’) for ‘-mtune=’ switch
cc1: note: valid arguments to ‘-mtune=’ switch are: nocona core2 nehalem
corei7 westmere sandybridge corei7-avx ivybridge core-avx-i haswell
core-avx2 broadwell skylake skylake-avx512 bonnell atom silvermont slm
knl intel x86-64 eden-x2 nano nano-1000 nano-2000 nano-3000 nano-x2
eden-x4 nano-x4 k8 k8-sse3 opteron opteron-sse3 athlon64 athlon64-sse3
athlon-fx amdfam10 barcelona bdver1 bdver2 bdver3 bdver4 znver1 btver1
btver2 generic
scripts/Makefile.build:147: recipe for target 'lib/asm-offsets.s' failed
make[1]: *** [lib/asm-offsets.s] Error 1
Makefile:1932: recipe for target 'prepare0' failed
make: *** [prepare0] Error 2
I'm not sure should I test it on custodian tree: arm/next, too. This
failure seems not related to the 2nd patch of mt8195-demo board.
Thanks
Macpaul Lin
