Switch off SCSI related config options to get rid of the board removal warning. We don't use this interface. Also disable UBIFS to decrease the image size, as this is also not used.
Signed-off-by: Holger Brunck <holger.bru...@hitachienergy.com> --- configs/pg_wcom_expu1_defconfig | 6 ++++-- configs/pg_wcom_expu1_update_defconfig | 6 ++++-- configs/pg_wcom_seli8_defconfig | 6 ++++-- configs/pg_wcom_seli8_update_defconfig | 6 ++++-- 4 files changed, 16 insertions(+), 8 deletions(-) diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig index b57e588f4e..d6b62340a3 100644 --- a/configs/pg_wcom_expu1_defconfig +++ b/configs/pg_wcom_expu1_defconfig @@ -17,7 +17,6 @@ CONFIG_SYS_CLK_FREQ=66666666 # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_ENV_ADDR=0x60060000 -CONFIG_AHCI=y # CONFIG_DEEP_SLEEP is not set CONFIG_LAYERSCAPE_NS_ACCESS=y CONFIG_KM_COMMON_ETH_INIT=y @@ -62,6 +61,7 @@ CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)" CONFIG_CMD_UBI=y +# CONFIG_CMD_UBIFS is not set CONFIG_OF_CONTROL=y CONFIG_ENV_SOURCE_FILE="pg-wcom-expu1" CONFIG_ENV_OVERWRITE=y @@ -71,6 +71,7 @@ CONFIG_ENV_ADDR_REDUND=0x60040000 CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="ethernet@2d90000" CONFIG_VERSION_VARIABLE=y +# CONFIG_SCSI_AHCI is not set CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_BE=y CONFIG_DDR_CLK_FREQ=50000000 @@ -96,8 +97,9 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_QE_FW_ADDR=0x60020000 -CONFIG_SCSI_AHCI_PLAT=y +# CONFIG_SCSI is not set CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_POST=y +CONFIG_LZO=y diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig index 9029e7babc..933515bb7d 100644 --- a/configs/pg_wcom_expu1_update_defconfig +++ b/configs/pg_wcom_expu1_update_defconfig @@ -16,7 +16,6 @@ CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_ENV_ADDR=0x60220000 -CONFIG_AHCI=y # CONFIG_DEEP_SLEEP is not set CONFIG_LAYERSCAPE_NS_ACCESS=y CONFIG_KM_COMMON_ETH_INIT=y @@ -60,6 +59,7 @@ CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)" CONFIG_CMD_UBI=y +# CONFIG_CMD_UBIFS is not set CONFIG_OF_CONTROL=y CONFIG_ENV_SOURCE_FILE="pg-wcom-expu1" CONFIG_ENV_OVERWRITE=y @@ -69,6 +69,7 @@ CONFIG_ENV_ADDR_REDUND=0x60200000 CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="ethernet@2d90000" CONFIG_VERSION_VARIABLE=y +# CONFIG_SCSI_AHCI is not set CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_BE=y CONFIG_DDR_CLK_FREQ=50000000 @@ -94,8 +95,9 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_QE_FW_ADDR=0x60020000 -CONFIG_SCSI_AHCI_PLAT=y +# CONFIG_SCSI is not set CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_POST=y +CONFIG_LZO=y diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig index aa74e1746a..b58199d783 100644 --- a/configs/pg_wcom_seli8_defconfig +++ b/configs/pg_wcom_seli8_defconfig @@ -17,7 +17,6 @@ CONFIG_SYS_CLK_FREQ=66666666 # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_ENV_ADDR=0x60060000 -CONFIG_AHCI=y # CONFIG_DEEP_SLEEP is not set CONFIG_LAYERSCAPE_NS_ACCESS=y CONFIG_KM_COMMON_ETH_INIT=y @@ -62,6 +61,7 @@ CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)" CONFIG_CMD_UBI=y +# CONFIG_CMD_UBIFS is not set CONFIG_OF_CONTROL=y CONFIG_ENV_SOURCE_FILE="pg-wcom-seli8" CONFIG_ENV_OVERWRITE=y @@ -71,6 +71,7 @@ CONFIG_ENV_ADDR_REDUND=0x60040000 CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="ethernet@2d90000" CONFIG_VERSION_VARIABLE=y +# CONFIG_SCSI_AHCI is not set CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_BE=y CONFIG_DDR_CLK_FREQ=50000000 @@ -96,8 +97,9 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_QE_FW_ADDR=0x60020000 -CONFIG_SCSI_AHCI_PLAT=y +# CONFIG_SCSI is not set CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_POST=y +CONFIG_LZO=y diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig index 2b18a88d44..385073336d 100644 --- a/configs/pg_wcom_seli8_update_defconfig +++ b/configs/pg_wcom_seli8_update_defconfig @@ -16,7 +16,6 @@ CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_ENV_ADDR=0x60220000 -CONFIG_AHCI=y # CONFIG_DEEP_SLEEP is not set CONFIG_LAYERSCAPE_NS_ACCESS=y CONFIG_KM_COMMON_ETH_INIT=y @@ -60,6 +59,7 @@ CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)" CONFIG_CMD_UBI=y +# CONFIG_CMD_UBIFS is not set CONFIG_OF_CONTROL=y CONFIG_ENV_SOURCE_FILE="pg-wcom-seli8" CONFIG_ENV_OVERWRITE=y @@ -69,6 +69,7 @@ CONFIG_ENV_ADDR_REDUND=0x60200000 CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="ethernet@2d90000" CONFIG_VERSION_VARIABLE=y +# CONFIG_SCSI_AHCI is not set CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_BE=y CONFIG_DDR_CLK_FREQ=50000000 @@ -94,8 +95,9 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_QE_FW_ADDR=0x60020000 -CONFIG_SCSI_AHCI_PLAT=y +# CONFIG_SCSI is not set CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_POST=y +CONFIG_LZO=y -- 2.31.1
