Modify Makefile for cpu_init.c and Start.s use some label,this defined
u-boot.lds of arch/arm/cpu/arm1176. But SMDK6400 use the link script
board/samsung/smdk6400/u-boot-nand.lds. So add some label form u-boot.lds
to u-boot-nand.lds
Signed-off-by: seedshope <bocui...@gmail.com>
diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile
b/arch/arm/cpu/arm1176/s3c64xx/Makefile
index 0785b19..f4b9574 100644
--- a/arch/arm/cpu/arm1176/s3c64xx/Makefile
+++ b/arch/arm/cpu/arm1176/s3c64xx/Makefile
@@ -30,12 +30,15 @@ LIB = $(obj)lib$(SOC).o
SOBJS = reset.o
-COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o
+COBJS-$(CONFIG_S3C6400) += speed.o
COBJS-y += timer.o
+CPUINIT = cpu_init.o
+
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+CPUINIT := $(addprefix $(obj),$(CPUINIT))
-all: $(obj).depend $(START) $(LIB)
+all: $(obj).depend $(START) $(LIB) $(CPUINIT)
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
diff --git a/board/samsung/smdk6400/u-boot-nand.lds
b/board/samsung/smdk6400/u-boot-nand.lds
index 29a4f61..2b87fc6 100644
--- a/board/samsung/smdk6400/u-boot-nand.lds
+++ b/board/samsung/smdk6400/u-boot-nand.lds
@@ -55,8 +55,29 @@ SECTIONS
. = ALIGN(4);
.mmudata : { *(.mmudata) }
- . = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) . = ALIGN(4); }
- _end = .;
+ . = ALIGN(4);
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
