On 11/9/22 18:30, Andrew Davis wrote:
* BASH code should be labeled as such.
* Code blocks should be indented by 4 spaces.
Fix these here.
Suggested-by: Heinrich Schuchardt <xypron.g...@gmx.de>
Signed-off-by: Andrew Davis <a...@ti.com>
Reviewed-by: Heinrich Schuchardt <xypron.g...@gmx.de>
---
Changes from v2:
- None
Changes from v1:
- New patch with fixes suggested by Heinrich
doc/board/ti/j721e_evm.rst | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
index 8608373365..ad70f15b7a 100644
--- a/doc/board/ti/j721e_evm.rst
+++ b/doc/board/ti/j721e_evm.rst
@@ -154,37 +154,37 @@ Build procedure:
----------------
1. SYSFW:
-.. code-block:: text
+.. code-block:: bash
- $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
+ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
2. ATF:
-.. code-block:: text
+.. code-block:: bash
- $ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3
TARGET_BOARD=generic SPD=opteed
+ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3
TARGET_BOARD=generic SPD=opteed
3. OPTEE:
-.. code-block:: text
+.. code-block:: bash
- $ make PLATFORM=k3-j721e CFG_ARM64_core=y
+ make PLATFORM=k3-j721e CFG_ARM64_core=y
4. U-Boot:
* 4.1 R5:
-.. code-block:: text
+.. code-block:: bash
- $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
+ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
+ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
* 4.2 A72:
-.. code-block:: text
+.. code-block:: bash
- $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin
TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM
firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
+ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
+ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin
TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM
firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
Target Images
--------------
