Dear "Wolfgang Denk", I Think i am debugging on u-boot.Because i am upgrading u-boot from v1.1.2 to v2010.12-rc3. I have tried to run u-boot on skyeye 1.2.5 ,and that works fine. Two version of U-boot are base on the same hardwares: CPU: S3c44b0 FLash: SST30vf3201 (4MByte) Net Adapter: RTL8019 SDRAM: H57V2562GTR (32MByte) U-boot v1.1.2 is old ,and it also works fine on this hardware environment.
Best Regrads MrGates ----- Original Message ----- From: "Wolfgang Denk" <w...@denx.de> To: "MrGates" <120368...@qq.com> Cc: <u-boot@lists.denx.de> Sent: Wednesday, January 12, 2011 4:14 PM Subject: Re: [U-Boot] "b reset" does not work in u-boot_v2010.12-rc3 with eldk4.2 Dear "MrGates", In message <745589936d574232be24ea063064b...@mrgates> you wrote: > [ lots of unrelated quote deleted] Please restrict your quoting to the relevant parts; see http://www.netmeister.org/news/learn2quote.html > I use SkyEye 1.2.5 cooperates with arm-linux-gdb . > Now the serial still no output information. > I thought the u-boot has failed before relocation. > I do not know where maybe wrong. > I have checked configs/xxx.h ,start.S many times. Are you sure you are really debugging a problem with U-Boot? Maybe there is some problem with SkyEye and/or how you configured it? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Nobody goes to that restaurant anymore. It's too crowded. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
