On Wed, Nov 30, 2022 at 09:42:43AM -0800, Tim Harvey wrote: > This series adds a DSA driver for the MV88E6xxx based on > drivers/net/phy/mv88e61xx and uses it in the gwventana_gw5904_defconfig.
I can't apply the patches on the current master, am I doing something wrong? $ git reset --hard origin/master $ git am ~/incoming/* Applying: net: mdio-uclass: scan for dm mdio children on post-bind Applying: net: dsa: move cpu port probe to dsa_post_probe Applying: net: dsa: ensure dsa driver has proper ops Applying: net: dsa: allow rcv() and xmit() to be optional Applying: net: ksz9477: remove unnecessary xmit and recv functions Applying: net: fec: add support for DM_MDIO Applying: net: add MV88E6xxx DSA driver Applying: board: gw_ventana: enable MV88E61XX DSA support error: patch failed: arch/arm/dts/imx6qdl-gw5904.dtsi:212 error: arch/arm/dts/imx6qdl-gw5904.dtsi: patch does not apply error: patch failed: board/gateworks/gw_ventana/gw_ventana.c:83 error: board/gateworks/gw_ventana/gw_ventana.c: patch does not apply error: patch failed: configs/gwventana_gw5904_defconfig:110 error: configs/gwventana_gw5904_defconfig: patch does not apply Patch failed at 0008 board: gw_ventana: enable MV88E61XX DSA support hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". $ git remote show origin * remote origin Fetch URL: https://source.denx.de/u-boot/u-boot.git Push URL: https://source.denx.de/u-boot/u-boot.git $ git show origin/master commit 39b81955d38c11254b455322b9d98e07010049d6 (origin/master) Merge: 597e7b784dbf 5e6c069b2c6b Author: Tom Rini <tr...@konsulko.com> Date: Mon Nov 28 13:12:40 2022 -0500 Merge branch '2022-11-28-networking-updates-and-improvements' - LiteX Ethernet support, dwc_eth_qos fixes, re-work fixing CVE-2022-{30790,30552}, macb race fix, Intel XWAY PHY support and add wget command and TCP support.
