On 01/11/2011 08:48 PM, Ben Gardiner wrote: > There are two separate issues causing failure of ea20 builds. > > I discovered them while trying to build a da850evm load with RMII support. The > second patch affects all boards that could use CONFIG_DRIVER_TI_EMAC_USE_RMII > of which ea20 is the only one set default in u-boot. The first patch fixes > the > second problem I ran into trying to build ea20 after developping the RMII > patch. > > Ben Gardiner (2): > ea20: fix libea20.o not found > ea20: fix undefined PHY_* errors > > board/davinci/ea20/Makefile | 2 +- > drivers/net/davinci_emac.c | 6 +++--- > 2 files changed, 4 insertions(+), 4 deletions(-) >
Hi Ben, thanks for discovering this issue and to fix it ! Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
