Re: [PATCH] xilinx: Remove unused ZYNQ_MAC_IN_EEPROM/ZYNQ_GEM_I2C_MAC_OFFSET entries

[Michal Simek]

st 23. 11. 2022 v 9:27 odesílatel Michal Simek <michal.si...@amd.com> napsal:
>
> The commit ba74bcf3e07b ("xilinx: common: Remove
> zynq_board_read_rom_ethaddr()") removed zynq_board_read_rom_ethaddr()
> because xlnx,eeprom link via DT chosen node is no longer used. But forget
> to remove Kconfig entries which are used by this code only.
>
> Signed-off-by: Michal Simek <michal.si...@amd.com>
> ---
>
>  board/xilinx/Kconfig                            | 17 -----------------
>  ...azedev_cc_v1_0_ultrazedev_som_v1_0_defconfig |  2 --
>  configs/syzygy_hub_defconfig                    |  2 --
>  configs/xilinx_zynqmp_virt_defconfig            |  2 --
>  4 files changed, 23 deletions(-)
>
> diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig
> index 746a2332ad5f..4ea78418780c 100644
> --- a/board/xilinx/Kconfig
> +++ b/board/xilinx/Kconfig
> @@ -58,23 +58,6 @@ config BOOT_SCRIPT_OFFSET
>         help
>            Specifies distro boot script offset in NAND/QSPI/NOR flash.
>
> -config ZYNQ_MAC_IN_EEPROM
> -       bool "Reading MAC address from EEPROM"
> -       help
> -         Enable this option if your MAC address is saved in eeprom and
> -         xlnx,eeprom DT property in chosen node points to it.
> -
> -if ZYNQ_MAC_IN_EEPROM
> -
> -config ZYNQ_GEM_I2C_MAC_OFFSET
> -       hex "Set the I2C MAC offset"
> -       default 0x0
> -       depends on DM_I2C
> -       help
> -         Set the MAC offset for i2C.
> -
> -endif
> -
>  config CMD_FRU
>         bool "FRU information for product"
>         help
> diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig 
> b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
> index 943b4da21d13..ce07f1633e04 100644
> --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
> +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
> @@ -8,8 +8,6 @@ 
> CONFIG_DEFAULT_DEVICE_TREE="avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0"
>  CONFIG_SPL=y
>  CONFIG_SPL_SPI_FLASH_SUPPORT=y
>  CONFIG_SPL_SPI=y
> -CONFIG_ZYNQ_MAC_IN_EEPROM=y
> -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa
>  CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
>  CONFIG_SYS_LOAD_ADDR=0x8000000
>  CONFIG_DEBUG_UART=y
> diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
> index acce95ec026c..179cb5221250 100644
> --- a/configs/syzygy_hub_defconfig
> +++ b/configs/syzygy_hub_defconfig
> @@ -9,8 +9,6 @@ CONFIG_DM_GPIO=y
>  CONFIG_DEFAULT_DEVICE_TREE="zynq-syzygy-hub"
>  CONFIG_SPL_STACK_R_ADDR=0x200000
>  CONFIG_SPL=y
> -CONFIG_ZYNQ_MAC_IN_EEPROM=y
> -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
>  CONFIG_SYS_LOAD_ADDR=0x0
>  CONFIG_DEBUG_UART=y
>  CONFIG_DISTRO_DEFAULTS=y
> diff --git a/configs/xilinx_zynqmp_virt_defconfig 
> b/configs/xilinx_zynqmp_virt_defconfig
> index 9696e418daf5..4732c39bdbe1 100644
> --- a/configs/xilinx_zynqmp_virt_defconfig
> +++ b/configs/xilinx_zynqmp_virt_defconfig
> @@ -13,8 +13,6 @@ CONFIG_SPL=y
>  CONFIG_ENV_OFFSET_REDUND=0x1E80000
>  CONFIG_SPL_SPI_FLASH_SUPPORT=y
>  CONFIG_SPL_SPI=y
> -CONFIG_ZYNQ_MAC_IN_EEPROM=y
> -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
>  CONFIG_CMD_FRU=y
>  CONFIG_ZYNQMP_USB=y
>  CONFIG_SYS_LOAD_ADDR=0x8000000
> --
> 2.36.1
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs